• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Alcohol streaks in UV prints

    On my V7000, I wipe mine down with this adhesion promotor and this microfiber mop. https://supply55.com/uv-adhesion-promoters/ https://www.uline.com/Product/Detail/H-4506/Mops-and-Squeegees/Heavy-Duty-Microfiber-Mop-System-18?FromOrderHistory=Y

  3. Extended Gamut Ink Permanence on New Epson S9170 Printer.....

    I haven't had any issues with orange on my s80.

  4. Substance Chrome and the new HP Latex machines, any updates on how to get it not to stick to the rear plenum

    When I issues running chrome, I got some translucent yellow tabs they sent to me. I put them over the sensor and it was able to read them. All they were was tranlucent yellow vinyl. Then you just need to adjust the setting in the setup on the cutter. I haven't done it in a while since I now run...

  5. Vinyl/lam for small car decals

    I second this!! Substance is the BEST!!

  6. need flatbed UV recommendation

    I Have had great luck with my Epson V7000. I have had mine for ~3.5 years now. Call IT Supplies and ask for Will.

  7. Cnc machine question

    I have chatted with these guys, but haven't used it. The owner was very nice to talk to. They look like solid machines. https://www.phantomcncsystems.com/cnc-machines
  8.

    Epson S80600 Printhead issue

    Might be the dampers clogging. I know the last time I had work done, it was just a flat rate to fix the issue, which was around $4k. But they fix whatever is needed to fix the issue for that flat amount. I got a new damper assembly, cap tops and new heads.

  9. Suggestions Anyone else having issues with defects in Oracal 3651RA?

    I woudl HIGHLY recommend giving Substance Media a try!! https://substance.com/products/icon-pm-2755

  10. Whats your experience with the Epson S80600 Printers?

    I have had mine since it came out. Replaced the heads once and the dampr system once. I am waiting until the new models comes out now to upgrade. I also had a S70670 and had great luck with that too. haha

  11. Summa EOT help

    I too buy blades from these guys. They work great! You do have a to get like 20-30 of each blade. If you are in the USA, I have a bunch on hand and could sell you some from my stock if you just need a few. I have found that the ADC sets the blades too deep. I have almost all of my depths...
  12.

    Need Help My pinch roller lever got broken off

    if you use a wrench, leave the screw in that is closests to the cover. Otherwise the bar can slide out of place.
  13.

    Need Help My pinch roller lever got broken off

    Haha. Mine broke off probably a year ago. My machine is probably 12 years old. I am just using an 8mm wrench to raise/lower it now. I might design and 3d print a new one someday.
  14.

    Summa Flatbed F1612 router motor died....

    That place is great. If anyone else needs any, I have 2 extra of these I am no longer using.

  15. Question 3M Custom Vinyl Wrap

    This is Substance Media.

  16. Need Help Double Sided Flatbed Sheeting with Multiple Different Artworks

    I am going to have to check that out. I have been with Caldera for 10+ years, but always open to things that may be better.

  17. Question 3M Custom Vinyl Wrap

    You would want 3755, which is their version with Air Egress. The RS-275 is theirs that has a lower initial tack. They are AWESOME to work with and will definitely get you samples to test out.
  18.

    High Tack Vinyl issue

    I haven't really noticed any "oozing" at all on my rools.
  19.

    High Tack Vinyl issue

    Definitely check out Substance!! This stuff is amazing!! https://substance.com/products/icon-444lse

  20. Any good Holographic films?

    Substance Media has an awesome one! https://substance.com/products/icon-pm-2755

  21. Affinity and Summa cutter´s

    I think it's an Affinity thing. I love the Astute Graphics plugins. I have asked them about making them for Affinity. They said they would be more than willing to, but it's on the Affinity side to allow it. So I am not sure if they aren't allowing 3rd party plugins or what? Maybe that part will...
Top