Search results

Are there any sources that are still carrying alcohol? we typically use isopropyl alcohol, but at this point, we are open to suggestions and options

how did you prep the glass? Looks like there was debris on the glass before install we have taken to "scraping" glass with a wide edge razor. even "lint-free" towels leave debris

to make sure you are able to keep working, do you snap them off before sending them out to get sharpened

years again while at a trade show, one of the flatbed vendors challenged people to bring "odd" items there was pile of stuff people brought and was printed onto; full-sized doors, T-Shirts, frisbees; toilet seat, mouse-pads, dinner plates, etc...

We have an old pickle jar with a slit in the lid. anything that causes blood letting get added

First, you need to take a step and evaluate the situation as a whole and evaluate why this is happening; Find the common denominator and see what can be changed to help eliminate these dissatisfying results. Is it the same customer that is complaining, Fire the Customer or increase the cost...

so the "paper" side of the backer got stuck to the vinyl? yeah, like stated a reprint is the only viable option.

We have run into this issue a few times over the years. Some times it is the fault of the General Contractor (GC), sometimes the Architect, sometimes the Engenieer and sometimes us the lowly sign provider. Regardless of the cause, it is how you handle the situation and more importantly how...

there are several MM here that can do this. Screen printing will allow for the color matching to be done the easiest, all is pending on the number of colors / complexity of the design

We also do the same. Typically a capitalized "I" works great, make the desired height, and everything else will be golden

decalman If you have a better / lower-priced source, by all means, share where.

Yes, We have reached out to the manufacture about doing a 1.5", 2", 2.5", 3" configuration. we Have not heard back from them though, grated it was over a year ago. Maybe with the downtime, they would entertain the option more.

https://www.cutterpros.com/xpert-sign-tools-xpert-corner-rounder we paid 368.99 Did not get the base, while the unit can move on the Arbor press. it does not interfere or slow down the rounding process. In fact, for the odd sizes, it is helpful to be able to rotate the rounding tool...

Not within your budget, but we have been very happy with ours got an Arbor Press from Harbor Freight, have done up to 080 alum

https://globalgarage.com/ http://www.digitsmith.com/

FireSprint.com Merritt Big Color ABA Visibility Products There are some other vendors here that do reflective printing

For those needing to get Quickbooks. Here is the best price found https://www.trustedtechteam.com/products/intuit-quickbooks-2020-premier-1-user-license

Displays2go Outwater Plastics maybe Orbus?

What are your fabrication capabilities? if you have a welder, use angle iron, for a 4 sided frame, weld hex head bolts to the back of the frame and then bolt to the fence using large fender washers. if you do not have a welder, you can use aluminum angle and pop rivet a frame together that way

Has anyone seen a special or sale price for the desktop version of Quickbooks Premier 2020? COVID-19 has really jacked up the sales and coupons normally seen this time of year for QB Thank you