Search results

On the latest Firmware, Mimaki as supposedly made it that the date can be put forward with no problems but putting the date backwards locks the main board. Obviously its everybodies own choice to try but will assumptions of: And, removing the battery can't hurt, how can you even suggest that...

Hi Guys don't post much if anything normally (based in the UK) but enjoy reading your posts daily. Re out of date inks & changing the date on the machine i thought i would offer this word of warning "DON'T". I know of a UK signmaker who tried the exact same thing on a Mimaki & locked the machine...

your serial port isn't LPT1, it will be either com 1 or 2 subject to how many serial ports you have KEV

Hi not from your part of the world, but is the material being stored in humid conditions. If it is the backing soaks up the moisture so that when its put in the printer the heaters dry the moisture out causing the material to buckle. Just a thought as i said not from your neck of the woods Kev

Sounds like a ribbon cable, they sometimes wear on the running tray causing them to short. Kev

Hi sounds like it could be the ribbon cable & pipe carrier catching has the head goes back & fourth, common problem has the machines get older Kev

Hi check out this link they are the people who took over Rainbow Technologies http://www.safenet-inc.com/support/tech/sentinel.asp Kev

Hi i've got a PDF on my work computer PM me your email address & i'll try to make time to send you a copy Kev

Hi base point is automatically set wherever you put the pinch rollers down & press set up, so if you feed the vinyl through place the pinch rollers down & press the set up button thats the auto base point. If you then feed the vinyl back to a point where you want to print & don't press base...

Hello High temp can cause the problem depends on the vinyl you are using, might be worth trying to lower the temp & see what results you get Kev

Hi guys Flexi 7.6 has a transparent wand in Bitmap menu should allow you to overlap & see whats behind the top image. Kev

Hi Guys, thanks for the warm welcome. Ken, uksignboards.com is a very good site been a member there since 2003,i'm based about 12 miles out of London Thanks again for the warm wekcome Kev

Just saying hi, bit of history been making signs for the last 5 years. Just myself wearing many hats through out the day. Run a Summa D60, Summa D120SE & Soljet 545ex v. Strolling through past posts & enjoying the read Kev