Search results

The laminator is webbed correctly. As for the vinyl hanging down, this is not causing the issue. On my usual runs of 10-30' on 30inch media Its ran through the feeder with moderate tension. I have figured out the issue (rollers were uneven in pressure) I know how to tune the machine to...

I've made it work manually adjusting the tension going through just ran 20' no issues. I just need to get it to the "laminating position" at a later time. If some one can go into detail about what I had asked before about adjusting just 1 screw instead of both what would that do, that way I can...

Continuing my research in this project in trying to get this thing to laminate perfect. The help I need from the community is, Describe what each screw does, on the top roller. Example - what change would occur if i only tighten the front screw and not the rear. Also if I'm facing warpage on...

Illustration of side removed Me after doing research, this is in the natural weight of roller laying on top of bottom roller slight crown. (which I believe is needed for this machine). And the nightmare.

Laminator woes need advice (detailed pictures inside) First off, I've read just about everything I could on setting up the tension on the lamintor. It is a Royal Sov 1401 Cold Roller 55 inch I can run 30'' media up to about 30' with very little walk, I do feel as If i do know how to feed...

I'm 1 hour driving distance away. I would be charging a rush fee to customer for the unexpected rush any how would make the drive more than worth it. Both are closed unfortunately, But I did call a competitor and they are selling me supplies(Thank goodness).

Well, that is opposite of what I'd like to hear haha! Fingers crossed for fellers. If anyone can shed some light if they are for certain if they are or not, That'd be awesome!

I guess in the holiday rush, I managed to not check my ink supplies and had one of my top clients need a quick trailer install over the weekend as they scored a huge contract. Does any one know if Grimco or Fellers are open tomorrow?

I have a customer wanting a traditional type flag for his business for all his service vehicles, Not a huge order but anyone have any experience with any solid members on the forum? If not, who do you use currently for any flag printing.

Just charged my business partner 4500 bucks for a wrap on his porsche. Its one pocket to another, he'd end up paying in tax's any how due to his success, so he just writes off everything as an expense and pays full price.

This ^^ When we first opened up we used Arlon overlam cast or calendered with the BS. Spent the first 4 months or so hand laminating. Now we are equipped with a RS laminator, however time to time, I still use my Big Squeegee.

Forgot to add, this is an alteration of a livery from David Pipers 917. The idea really sprung for the client whenever he saw the 918 spyder done just like this.

RJ it helps that my business partner has 25 years in the race field. I've posted a photo of the shop that I'm in before but i'll post it again for fun. It's helped sell 99% of the clients that I have come in to do business. Its really great having the Wraps right on hand to show customers why...

Hello all, Really excited with the overall look of this car, not saying that our prior wraps were bad by any means but this Cayman has been my favorite this far out of the 5 we've done this year. Just decided to share. I also learned a few new tricks for this vehicle. In the past we've...

In my area, We have only 1 competitor within 20 miles, Its a somewhat lower population area but I'm RIGHT SMACK in between Jacksonville FL / Savannah GA. We are only 7 months old and get $75+ Per hour on most jobs. My competition is at 88 an hour (Which i did not intentionally undercut them by...

Doesn't really sound all that bad to me.

Tried finding this script, no luck, thanks in advance!

Yea I finally got ahold of a very nice Small distributor, My vocabulary stands corrected in this case. After talking with him, It seems I was only missing cleaning 1 area which I now can actually see when manually releasing the head.

Alrighty, so I've called around, Apparently this model (1324) Does not have a spit pad replacement, but it comes as an entire unit with the maintenance station? I would expect to be able to replace the spit pad, but 2 techs now have said it is an entire unit. I have pulled off the shroud to...

Just a few things as its my first time diving into this machine for some maintenance aside from the weekly stuff. I'm not afraid to tackle it, I just have 0 resources of a first idea to what I am doing just yet. I used to maintain all of Speedysigns printers when I was learning the ropes of a...