Search results

Have been running X6 for quite a while now and haven't found anything to be slower. If you want to go back to X5 tho it should be easy enough. Just uninstall X6 and re-install X5 Cheers Mike

looks like BallonXBdBT Cheers' Edit: You can get it here ---> www.fontyukle.net/en/Balloon+XBd+BT.ttf

Mimaki JV33 I use my Mimaki JV33 160 for making film with very good success.. (using SS21 solvent ink) I can produce halftones seps (successfully up to 85lpi ruling), and solids that are as black as anyone would need. I tested by leaving a screen shooting for 40 mins from a 5000 watt exposure...

OK, was a bad connection on one of the cables. Got that sorted. Printed for around 15 minutes then got the message "error 07, voltage (0---)" Get this no matter how many times I power off, unplug, leave for a while and reboot. I would pull my hair out if I could afford to lose any more!

Finally managed to get the time to clean the manifold. Seemed to indeed be blocked to start with. Cleared that out no problem. Reassembled to the print head and have had to gently force fluid through the nozzle to try and clear the head itself. Have had marginal success with that. Decided to...

Sorry, after reading other threads I realise that I am using the original Mimaki printhead, not DX5... thought the DX5 was from Mimaki.

Hi folks. My JV33 isn't printing any magenta what so ever from the right hand head. (DX5). I have done numerous 99 minute nozzle washes, hard head cleans etc. Replace capping station and pump. Dampers are all ok. I have swapped the offending magenta damper location with the cyan that's next to...

Hi folks. Found this site via a web search. What a great site with HEAPS of helpfull information! About me: I am a screen printer (shirts / apparel, signage, bags etc), digital printer- JV33. I also work with vinyl cutting / signage (CGFXII series cutter) plus play around with sand...