Search results

I have done a complete clean and calibration before profiling. I can also print out the same image through versaworks and not get any banding so I am pretty sure it is the profile. I have attached an image.

I am creating profiles for our Roland XJ-740 through the Caldera rip software. I can get it looking great for ink density and colour but there is always faint banding. The machine is cleaned and calibrated before it is made and I use an 8 pass bi-dir setting with 720 resolution. Any ideas?

You need to go into the main tab in the set up box and press the + button next to page, then add in the gap that you want in the 'M. Top' and 'M. Bottom' areas to increase the margin. We normally put 20mm in both so we get a 40mm gap between the barcodes.

Interesting that a couple of you have said that you would buy 2 x S40600 instead, why would that be?

How is it finding profiles for the machine? We have tried running the roland through caldera but there are literally 0 profiles available?

Hi all, I am considering upgrading our Roland XJ and have been reading up on the S80600. I don't have any experience with Epson machines so would like to hear your thoughts. The main thing I want to get out of the machine is the ability to rip files with registration dots compatible with our...

Caldera is a bit rubbish in that sense there really aren’t many options to choose from. I tried flipping the artwork but it still starts from the back corner which makes me think it might be a setting on the machine. I have in the past had it so that it starts cutting from the front edge but...

It is Caldera V11.2

Our Graphtec FC8600 is driving me mad. When we print stickers multi up on a page and top cut them we then want to through cut a square around the individual sticker, no problems with any of that except that it always wants to through cut in the top left corner of the sheet so it winds the whole...

Anyone know where we can get standard profiles to run a Roland XJ 740 CMYKlclm through Caldera, any of the main profiles sites don't seem to have any set up. Cheers Dan

Hi guys, I can generate barcodes through caldera but have no idea how to get the graphtec to read it, does anyone know? Cheers Dan

Thanks all for your replies. This is the conundrum I get as it seems to me the laminating and Uv printing aren’t really meant for each other. I feel though that it limits the potential of UV printing for instance printing a sign direct to alu panel, the life will be reduced if it can’t be...

Yes, the laminated that we have done get the slivering but after a while that goes away especially here in Sydney where it’s usually nice and warm. My real worry was more about it delaminating especially on dark or black areas. I worry about getting that phone call in a months time that the...

How do you check the lines for air leaks once the heads are removed? Sent from my iPhone using Tapatalk

Hi guys, We have just installed a new hybrid Handtop UV printer. I am really pleased with the print quality and want to start printing wall and window graphics on it instead of using our Roland solvent machine. The problem is we generally laminate the prints so they are protected and easier to...

Yes after more digging around on the internet I found a set up instruction sheet and it works great now.

I have just found this and tried it and it works!!!!! I am so happy. http://otrs.caldera.com/otrs/public.pl?Action=PublicFAQZoom;Subaction=DownloadAttachment;ItemID=137;FileID=269

Hi all, I have a Zund G3 cutter with a barcode reader. Our Caldera rip can print barcodes but when we scan the barcode nothing happens. Now I'm sure that there must be a set up somewhere but I can't work out if it is on the rip side or the Zund side of both and neither has any instructions how...

Hi all, I have a Zund G3 cutter with a barcode reader. Our Caldera rip can print barcodes but when we scan the barcode nothing happens. Now I'm sure that there must be a set up somewhere but I can't work out if it is on the rip side or the Zund side of both and neither has any instructions how...