Search results

13 years, never had a color shift issue before. I've never created a profile, only download them from 3M and Oracal, and used to use roland profiles when I had a roland. Onyx says the next step is to go buy a i1 and adjust the profile so the new output matches what the profile used to look...

I have no idea what that means, tried googling 3 de00 shift, didn't help. I'm guessing it's bad. Any idea how to fix it or why these colors suddenly print this much differently a week ago?

Are there any settings in onyx or on the printer that could be causing this? Because reprinting from the rip archive causes the shift, and so does re-ripping. I've also realized now that it's every panel from this wrap is printing wrong now. It seems even the reds have shifted slightly. So...

pic added, thanks.

Having an issue, printer is not outputting same colors on reprint. Trying to reprint a wrap panel, was originally printed 1 week ago. When trying to reprint (not re-ripping) the gray colors are all off, a much "cooler" print (see pic). I've tried everything I can think of, checked settings...

Is this something a tech is needed for, or could it be DIY?

Wow that's crazy, for $3,800 they should do more. Is the tech coming back? Did you run the printer long enough for him to see the issue before he started doing any work? After he finished did you do the same long print test to see if the issue was corrected? In my case they replaced heads...

I have the same issue with an s80600. Machine is 3 yrs old now, first noticed this happening about a year ago, right before my 2 yr warranty expired. For me I noticed it mostly when printing wraps, and especially if there were large areas of solid colors. Issue wouldn't start at the beginning...

Never had this issue on our s80. Do your heaters heat up?

Fading prints is much more dependent on your ink than the grade of vinyl you are using. Laminate always adds UV and scratch resistance. Higher grade vinyls don't shrink and crack as quickly as lower grade vinyls, that's the main difference.

Montserrat is really close, except the R. Any other ideas on what font the R is?

Can't figure this font out. Anybody know it?

I prefer the S80 because of the light black ink. Makes a huge difference when comparing side by side with and s60 on any print with grays in it. And the red and orange inks make a big difference too, very vivid reds and and oranges. S80 is about 30% slower than the s60 but still much much...

For foam, I could use whatever, a few of my uncles happen to be in the foam/upholstery distribution business. Map is actually south up, but we can call it north for ease. To the East (right) is nothing, some woods and a creek. So directing the noise that direction would be ideal if outside...

My neighbors office is right at the northwest corner of my building, I don't want to put the pump there if it's just going to be loud for them. Really not liking my layout options with the CNC in the new addition. Also considering this layout(attached), spinning the CNC room to front load. If...

Yes the pole is a column, can't move it. Attached some better mockups. Considering putting the CNC in the new shop, will be much easier to put the pump outside there, nothing around it. But noise level for the vehicle installers, and myself in the office is my concern with this. Along with...

I meant to say, distance from walls would be to the gantry for the sides. A question I have is does it matter which side of the table you would load from? Attached a rough idea of what shop layout could be after the addition, and if we put a cnc router in. The dirty side of the shop, where...

So would building a room for a router in the corner of the shop, where the back of the router is 1-2' from the wall, right side(when standing at front looking at the back) is 3' from wall, front is 3-4' from wall, and the left side is 3'from the wall, but this wall has a 6' double door on this...

What would you say the smallest room you would want to build for your router table be? Also, how big of a deal to load sheets onto the bed from the side rather than the front or back, having to rotate the sheet 90* as you put it on the table? The 80x40 we are putting up is mostly for vehicle...

Robot arm seems like it would work, but I don't think I want to go down that rabbit hole? They won't go for anything less than aluminum, not even ACM. The netting is for batting cages, driving ranges, etc. anything with a net really. I have plans to the city right now, hoping to get approval...