Search results

Glad to see that im not the only one having this issue...

Is it possible the lines from the capping station to the waste tray are clogged? If I fill the capping station with cleaning solution should it drain or just stay full? The printer is right at a year old and has not had a huge amount of printing time on it.

Does anyone have any advice? I have been cleaning the seal around the capping station and the swab is completely blue. Can my cyan nozzles be leaking?

Ok, the printer sat over night, just did the nozzle check and it looks like $hit. one of the black nozzles now has a blue tint to it. The capping station appears to have a blue color to it. could my cyan nozzles be causing issues?

It appears to be from the cart to the carriage. After printing a 4x4 solid magenta square the color came back and the lines are starting to shift back to the magenta color.

I did end up cutting the old cartridge open and it was magenta, I have got some of the color back by printing huge pink squares but the problem is by no means fixed. as for the maintenance station the pad doesn't appear to be swollen up, I clean the wiper and capping station regularly

Im Pretty knew to the printing side of things. I have a mutoh 1204 from SW, had it about a year, maybe slightly over. I do regular cleanings and have never had an issue until tonight. Last night I printed a red banner, fought and fought the color and couldn't figure out why. Anyways, went to...

I know who I'm calling if I ever have a job like this come up.:ROFLMAO: Great Work:rock-n-roll:

I use 3651RA and 210 Laminate

I have always destroyed them taking them off but just drill a hole through the axle as close to the wheel as you can, get a big washer that will fit over the axle and use a cotter pin to hold it all together. Makes it much easier on the next tire change too.

I will try this, thank you

Flexi

Another thing I have ad problems with with my Graphtec is it WILL NOT maintain the default speed settings. I have the speed set to, lets say 12, on the cutter and have production manager set to the same. Most of the time after it reads the registration marks the speed jumps to the maxium. This...

I too started as a hobby with a Chinese 24 inch vinyl cutter so that I could make some extra cash to help pay my way through college. The hobby turned into a side business. It has grown more than I ever imagined it to (although still very very small). Most everything I do is for a friend or a...

Yes, it will more than likely all be in your profiles. Curious tho, did you just have extra money laying around and decide to buy a printer because you liked the way the canvas looked? Or are you in the sign business? I mean this is your first post...

Are you sending the cut file straight from Corel or using a different RIP? I have ran into this problem and fought it for hours and wasted tons of material using Flexi. Closed production manager and re opened it and it cut perfectly. I wish I had an explanation but this worked for me. Also...

Found it on dafont as Ballpark

Here I spend the last hour and a half sorting through fonts and 5 minutes after I break down to ask for help I find what it! sooooo, I guess this can be deleted now.

Need Help With The "MV" font please and thank you!

I just received an email from Dave with us tech. he informed me that he believes it is the speed adjustment knob. Heres the kicker...I have replaced that at the same time I replaced the very first speed controller. This may seem like im rambling but bear with me please. I can have a speed...