Search results

Ran the power cord to a outlet that has a ground. The one it was plugged into was an old one that had no ground

Came back from post office and my print was still printing. Finished the whole print. Lets hope thats what the problem was

So far so good, but I have been working at the computer while printing. I am about to make a print and leave the computer to make the post office. Let hope its still printing when I get back!

I will try the non RIP test. I didnt even think of dirty power. Just did a check and sure enough that outlet has no ground. I plugged it in a different outlet that has a ground. Lets see if that helps! Thanks for the help so far guys!

I have a seperate print server. My Mutoh didnt come with a built in one! But I have tried resetting it

Do you use Flexi? If so where do I find that option? I have tried everything and thought it was the voltage problem. I printed all day today fine. On my last print which was a small file, about 30" wide x 6" tall, it stopped just about 2" into the print? I do think I am seeing a pattern though...

So I searched the forums more and found that you can turn the voltage up to 5.3 volts and one user actually turned his up to 5.35 volts to get his to work properly. I just readjusted mine to 5.25 volts and I got a full print!. Hopefully this was the fix. The Mutoh service bulletin states up to...

Anyone think it could be the voltage still? Or does this sound like something else?

Print is 30" wide by 40" long. It will print about 12" and stop.

So I went to do my first large print yesterday since my printer has been back up and running. It printed about a third of the way through and stopped. I searched the forums came up with a voltage check on the power board. I did this and adjusted to 5.15 volts like it stated on a board with...

Still acting up a little. Did about 6 prints and the black dropped again. Hooked my syringe and pulled ink through even though the damper was full and it started working again. Bad pump or pump lines im thinking. Cant be pump motor, color still works perfect. So I guess the printhead is fine...

I've done about 5 prints so far and so far so good! My shims are made out of foamcore so I guess every so often Im just going to have to change them out

So Bradster941, you got me thinking. I remember I had to make some shims for under my cartridges because of the Mutoh ink cartridge problems. I checked my shim and realized it was squished. So I made a new one, then siphoned the ink totally out of the damper in case of any contamination. I have...

Never mind you literally just answered my question...LOL!

Did you leave it on or just for a test print?

Auto-For pure hue is it the option that shows all colors? Did you just check the black?

"NFG" I love it Auto! Yes parameters of old board the tech was unable to get since the board died. Headranks and alignments were done. I just tried reinstalling Flexi with no luck!

Nozzle check is fine. Im thinking maybe a software issue. Im going to reinstall flexi right now and see if that works. I got the ICC profile of Mactac to print pretty black, not as dark as I would like it but close, but it is still not printing registration marks. I chose registration marks to...

Could this possibly be from a printhead being no good?

Next year it will equal 112, the year after 113, the year after that 114, and so on. Its simple math really. And if you were born in 2000 or after it doesnt work