Search results

The lift mechanism was pressed on. I used a gear puller and it came right off. There isn't enough play to get the roller out so I had to disassemble one side of the frame. hopefully able to get it back in the machine today to see how it works. I found a local shop that has experience with...

Hello - I have the model MVT-600 from masterlaminator.com. After primarily running 30" material through, it has developed an indent. Now when I try to laminate large material or even mount to large panels, I get bubbles in the center. I need to replace the top roller and I am having difficulty...

The material I use is 3M IJ35C. At the moment, they are having logistic problems and everyone seems to be out of stock. So I am forced to buy it in 54”.

This is what I do for shorter lengths - (as suggested earlier) for jobs longer than 54", I have been letting the print dry, backing the material up and printing the second file above. Then I laminate and cut the material in between the jobs to fit in the cutter. Still think that this is a very...

Yeah - I would rather not waste 24" x 50 yards of vinyl.

Yeah - I cant seem to find any settings that will allow me to do this. Seems like a simple feature that should be included in Flexi. I have been doing what you mentioned and at least gets the job done. Thanks!

Thanks for the reply. I did fail to mention that these would be individual design files. I have used the duplicate function with success when I just need to run multiples of the same file.

Hello - I am using Flexi 10.5 This seems like it should be very easy, but I have not found a setting - let me explain. I am printing on 54" material, but have to contour cut on a 30" cutter (my larger cutter is down at the moment). so I would like to print 2 different designs on the 54"...

I would be appreciative to also get a copy of this if still available - thank you very much!

Hello - Off and on, I have a need to print small decals on clear background with white print (sometimes chrome or gold has also been requested). Is the Gerber Edge still the go-to for stuff like this? These decals will be approx ½ - ¾" tall x 1-2" wide and be used to put a logo or a...

Looking for a member or suggestions where I can get a quote for 100 printed (single color) beer can koozies. Thanks!

Unfortunately - i just learned this expensive lesson myself!

I just did an initial ink fill and it worked - thanks!

After doing a head soak, some of my ink lines are clear (no ink). What is the best method to get ink back to the printhead? Just do a bunch of cleanings? Thanks!

Mutoh VJ-1324 always worked flawless till about 3-4 months ago I started noticing these streaks when there is black (see photo). The direction of these small streaks is toward to maintenance station. Nozzle check shows a couple bad spots. Anyone have this happen? Any solutions? Thanks everybody!

2013 RXDI

PPG paint code for Chrysler Viper Red is PPG 73840 where Sea-Doo Viper Red is PPG 74790. I might give it a shot and hope that it is close enough.

Hi there - thanks for the info, but it is not the Chrysler Viper Red. It is the PPG color called Viper Red. It is actually going on a Sea-Doo Watercraft.

Hello - I have a customer that would like me to print some graphics and he has a PPG paint code for the color that he would like (PPG74790 Viper Red). He is not local so I can not see the color in person to match up myself. Are there any online cross reference sites where I could get a close...

Sorry to be so late with responding, but I did want to mention that member Quark from PrintTrader.com really helped me out with awesome service and pricing. They worked with my crazy emergency deadline and really saved me. After looking back on the job and crunching the numbers - I would have...