Search results

look around the tubing where the plastic connectors are for leaking ink, could be a broken connector or old filter but id imagine you would see some ink around where there is a leak.

I'm just wondering if anyone is using a zund and what blades everyone is using for different materials, foamex, card, paper, banner, etc. the main blades we use are a standard type 6 and a z17 but theres lots we have not tried. is there any better ones we should have? thanks in advance

hi we have been testing textiles for a while now, a guy we work with has give us a Maxx press to use for testing but we have never used it before or had any expieriance with a heat press, anyone know temperatures we should use for different things, how long they go in for ect any help would be...

those tubes go into your waste tub, is that full? if so you need a new one, could be that its full and the ink has backed up and caused a leak

sounds like either your belt or encoder is nackered, get them checked by an engineer before if eventually dies on you

your printheads are in terrible condition and you have a leak, we have the qs 3200 heres what i would do power off printer and take out all printheads, check all the tubing and connectors for air leaks, make sure your white filters are ok, think your supposed to replace every 12 months. put them...

what did you clean the electrical connectors on the printhead with? we have some cleaning sponges with our latex machines, we have had issues before when we have not properly cleaned the printhead connectors and the inside of the carriage where the printhead slots in, make sure all the...

i like'd the 360's, we had 4 of them before upgrading to the 570 and 1500

hey, im in Manchester and we have had the latex, 260's 360's, now were on the 570's. can be good and bad but it depends what your planning to run, give me a shout if you need any help mark

does anyone have a template for a strut card, the stand that holds up the picture? in illustrator format if possible. thanks

Im printing on a Durst omega 2 and every now and again the static is causing massive overspray on Foamex panels, is there any products available for a quick fix, I've heard of the static wire/sprays etc but i wasn't sure which was best to look at. cheers

I'm looking for a material that will print on latex 360/570 that can be used as a roller banner/roller cassette. must be blackout and preferably have a downloadable profile

optimizer is at 24 not changed airflow

i should add I've tried from 6pass unto 12pass and keep getting these bubbles

how do you find printing on paper/wallpaper? I've got a 570 and having a nightmare with it, what heat, vac, ink density settings are you using on papers? I've been trying to run a 200gsm paper through it, gone from 100 degrees down to 70, knocked the density down to 90, had to keep vac at 45 as...

I've upgraded from the 360 to a 570 but I'm not liking it. on the 360 i had wallpapers printing all day, where as on the 570 i just can't get the settings right on all kinds of materials but mainly papers and wallpapers it seems like theres just way too much heat now. I've been trying to print...

no its the solvent phototex

I'm trying to profile phototex opaque on my latex machines but i just can't get it to cure without easily being able to scratch it off, I'm using GMG software so cannot import a profile like you do on onyx/caldera. anyone got any ideas that will work for the heat, optimiser etc? thanks

yes as i was told by an engineer that the omas must be OFF on the 360? confused me as it had to be on in our old 26500's but he insists it should be off, also i should add i have been printing on the same materials with the same profile for a couple months with no problems than BAM, this problem...

does anyone use hp pvc free on the 360's? were having problems with printing files that join up (wallpapers) when we print and cut them were getting a bow along the length of the print, so you put them together in the middle and one edge is touching but the other edge is slightly out. i have...