I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Ok I replaced fuses and I have tried adjusting settings. Swapped out head cables. Still only 1 head sorts working the left head. And only two colors will print based off if setting is kmcky or just kmcy
I ORDERED head cables from cmyk parts. The eBay ones I have seem to have the spacing slightly off for the pins compared to the OE. I tried to fix the OE ends and blew a power fuse so those were junk like I suspected. So 96 dollars in cables they better be OE style and some more fuses. Hopefully...
Attached the test print. The left head is the only one firing. If I swap heads same deal. If I swap cables the other head prints but just the same two sequenced colors. Head fuses are jumper ed right now. I'm lost. Has to be a connection bit all parts work to the same degree when moved around...
Attached the test print from Maintenence Menu. The left head is the only one firing. Not all three left colors print in a normal test print however.
I have sucked ink through all dampers and on a clean it's pulling ink to waste tank on all colors.
bought used and refurbished so don't know if it was an original issue.
The two printed colors are 100% I'll post a pic of the test print today when I get up.
going to double check the cables they are both new and hooked up the way the old came out. If that was right to begin with.
Double...
The colors printing switched from magenta to cayan after only doing a strong head clean so now it's the blue and black. On the new spitoon sponge there are 6 lines of only the left head colors that are uniform. So the right head is not spitting into the spitoon.
I am no expert in printing but have done a ton of research I'll explain the facts and see if I can get a list of things to look at.
1. New capping station, head cables, wiper, cleaned, new ink pump, new left head and supposed to be new right head came with.
2. 6 colors so heads are the...
Thanks I will call for a roll to set up on. I probably will laminate then. I don't care about being the cheapest. Not when design effort is put in. Keep it nicer.
So I did a wrap for a dirt mod that the printing was subbed out. It was thick and kinda payable went on great. What oracal do you think this was. Genius me forgot to look. I have my own private ter now I bought a cheap roll of 3651g but it's not payable enough and thinner. Do most you skip...
OK follow up. Upon trying to order they had PayPal symbols on their site and when you check out all they take is a wire transfer. I've never done that so......nope. not gonna now. Hope this helps. Maybe they are legit but nobody came forward to say otherwise. Looks and smells like a fish must be...
Well my search found only people asking and getting pms or email. All the web searching comes up with bogus down load anything sites or old links.
Any help appreciated. Looking for a Service Manual
Chuck
ncoating@yahoo.com
I was wondering if it could do panels that size. I've seen videos of 4x4 panels so it should be doable?
How does laminate look on the Big Squeegee on a wrap?
I was thinking this or a manual laminator for now until I had more volume. Any suggestions welcome.
Printing on a Mutoh Outdoor 46"...
Anyone have used up cartridges or the stickers for the outdoor. I don't want to buy ink cartridges for the sticker. Bout one and just want to go bulk right away.
I'll pay to ship.
Chuck
Signs 101 Network RegistryIn what country are you located? USA In what state or province are you located? Upper Michigan In what city or town are you located? Gladstone What large city is nearest you? Green Bay WI Check all items that apply to your listingSupply Sharing
Local Networking...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.