Search results

ScottyDoo, sorry to see your gave your age. Its sad, but there are 2 or 3 guys on this board that are going to exploit that fact by name calling just because you might be a little younger than some here. But!, If you run a 72s your not that dumb! Good luck and keep your head down! :) PS, I...

We had a little learning curve contour cutting on the Graphtec FC-5100 with flexi 7.5-7.6. Have not had a problem in 8-9 months. Just put the BLADE over the first mark (lower right) and hit enter. It works every time. You just cant have too much or too little "tail" at the front of the...

$60? Gator maybe?

sorry, click on the link 5 post up, there is a pic there..

Before you go and disable anything, look at the card and make sure nothing is pluged into it.

What slave? Are you talking about a 2nd hard drive pluged into the "slave" side of the hard drive cable? Acard.com is NOT showing a driver for that card. Maybe Dell has there own driver that is bundled in the software that came with the computer. I would crack open the box and see what is...

A SCSI controller is something that your SCSI devices plug into, aka SCSI hard drive. Before SATA drives came out, SCSI drives some of the fastest drives on the market. The controller can be a PCI card or built onto the MB. If the device manager is showing a problom but every thing is working...

Hey Color Dude, whats the best way to clean the encoder strip on the Falcon? It seems different printer companys have different recommendations.

The ISA in Vegas this year, I had a headache 10 min after getting there! :help: It smelled like people were painting cars in there.

What rip are you using?

I found the link for the 72s video, the last time I checked it was not working on my old peice of junk lap top. Maybe you will have better luck... http://www.colorspan.com/videos/72s/promo/start.htm

Colorspans 72si Gator prints 600 sqft hr (billboard 300x600) for $55K. Its runs 600x600 4 pass at 200 ft/hr. and looks good at that speed. Colorspan comes with bulk ink at $125 liter and the Seiko's 1 liter cartridges is something like $260. Im still up in the air on the Colorspan vs. Seiko...

Fred, why sell the Ledco?

I use FireFox and I can see your attachments, but I cant see the spell checker in the top right corner when I reply to posts.

Great...........

50' is my longest CAT5. It goes to a 60" wide ink jet with no problems. Maybe I'm just lucky not to have much interference.

Next time I do a 50' run for a trailer, I'll have to film it start to finish, I know a trick............ :)

Please DO NOT BUY FROM SIGNWHORE HOUSE,,,, did I type that? The worst support in the world!! Buy your printer / cutter combo from a dealer that will give you good tech support EVERY time. I would say SSK for the east coast and Exicters for the west. The reds for the Mutoh are great. Good...

Dude! I can see my house!

Wow! VMP sounds like a pain, in Flexi, 1. Select logo 2. Click compound I have to do this to 90% of the logo's on BOTW.