Search results

what did he do?

ARE THE DAMPERS FULL? was captop replaced? or at a minimum was the felt pad replaced? (easier to change captop) next question is, of course, why didn't the bell & howell tech change captop? followed by

at one of my favorite clients, a "youngish" (moving up on 40 mid level manager argues politics with me once in a while we discussed where he gets his news, his answer? COMEDY CENTRAL at least not TIK TOK

nobody under 60 reads....

a wacom, i have one of those, (since the wife went in the hospital a year ago, i don't think i have had a chance to sit at my desk)

are you one of those track ball people? we had a local client who INSISTED on using a trackball on a machine that cut plexglass. he killed the trackballs in a week or so each & couldn't understan why it was a bad idea

chris they are MOST LIKELY not expecting the OS upgrade to fix the problem potentially, the firmware might correct a problem (but i am skeptical) they are upgrading MOSTLY because the troubleshooting flowcharts and help desk software they use only supports the latest versions this makes ACTUAL...

I am not the one to abswer this. truthfully, we print a fair volume of signs, but, have only done 8 or 10 banners sincd 2016 i am sure someone will answer

i clean my encoder weekly i believe since we use 3rd party inks, there is a little more "misting" so more vapor settles on the encoder strip. when you cleaned yours, was it dirty? when mine needs cleaning, the edges aren't square (assuming i am printing a square) the straight edge, in the...

there is a screw adjustment for skew.... did you clean the encoding strip?

yes, we built tv studios, in the 1980's for the storer family (now comcast) & george ring in the late 1970's (now optimum) & maintained banks of 3/4" vcrs in the days when HBO mailed the movies to the cable companies. then did a few years in the photo processing industry (used moto photo and...

these are my choices from harbor https://harborsales.net/Products/Panels/Foam.aspx

i am no expert the surface is different on these some are paper, some plastic (?) not all, i imagine printable in every way we GENERALLY use paper foam board & print with our (MP31 ink) Mutoh VJ1617h

where does one get a degree in printing management? do you get an associate degree, a BS or what? just curious

do a good soak for 2 or 3 hours. take hemostats from drug store and pinch off the line from yellow captop to pump. fill captop to the top with cleaning fluid do a test print if no good, with a syringe, pull ink through the yellow captop try to print again

yes. That is why i suggested what can be the somewhat messy process of plugging holes and shaking the ink. short of dumping old ink, flushing and reinkiing with fresh ink, agood shake at least gets some of that back into suspension. In the past i have mentioned taking old cartridges to home...

does your model have 6 keys like mine does? i believe turning any of the keys also triggers an emergency stop

you are i guess using 3rd party bulk ink (not a criticism, we have used jetbest ink we buy from premier colour for years) in order to periodically shake your tanks, you will need to plug the vents. however solids do settle. (my mutoh nags me every day to shake the ink bags) did you post a nozzle...

the purpose of profiles is to compensate for variation (from brand to brand and material to material) in inks, substrates, etc AND MOST IMPORTANTLY variations in your machine before i broke out the I1 and calibrated my roland's fire engine red was rust colored grey's were not neutral one end...

when i was like 12 years old, we had 'metal shop" taught by a really cranky old bastard, whose name escapes me i was probably 128 pounds at the time, but one of the other kids was just under 100 the teacher (cranky old bastard) was trying to get richard to cut a piece of sheet metal, on the...