• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need a profile

    need to know what software you are using to help you, you should check your softwares web site, //chopper
  2. So What software?

    if you like flexi, it would be a easy transition to use there print and cut software, and you can always use an oem rip, or the flexi rip, I use sign lab and I fid it easy to use, I rarely need to use photoshop, or other programs, my signlab can do almost everything that I would need to use the...
  3. would this be a good first printer

    that is a pigment or dye based ink machine, it would be ok for indoor posters or photographs but wouldnt be much good for out door signage unless it is short term, so it depends on if your work will be out side or not//chopper
  4. can't find a driver

    on those I think it takes a bayloc, or a serial cable, on the plotter end and a db9 on the puter side, if you show some pics of the plotter cable connections that may help, or some one here with the same cutter could point you in the right direction, good luck. and welcome to signs 101 !!//chopper
  5. Opinions Please on Natural Camo

    I think they look good but I also think just a few less leaves would be better, just my opion//chopper
  6. One Stop Shopping Question

    Gebo, I buy all my supplies local if I can, I like to keep supporting my community if at all possible, and I have found for the most part the prices are fairly close to one another, and when I need supplies they are only 9 miles away//chopper
  7. SignLab "Crossgrade" cost?

    they are a sponsor here, click on there banner and give them a call // chopper
  8. security dongle question

    I would jump on that for 1250.00 when a friend of mine lost a key to flexi they would replace it said he had to buy a whole new program!! 3500.00 //chopper
  9. Mud Flap Girl??

    I have that, I will send it if you like//chopper
  10. VersaCamm Sp540V Print and Cut problem

    press menu,( up arrow to print cut adj) right arrow to test print (up arrow) to auto press enter this will do an alignment for the optical eye to the crop marks you will need to have media loaded to do this //chopper
  11. Transparent film for reverse printing with pigment ink

    I here ya Dale I was thinking the same thing kinda hard to print on the adhesive side...//chopper
  12. Transparent film for reverse printing with pigment ink

    the only printing that I have done on clear is I just use laminate and printed on it.. oracal 290, and 210, and then I laminated the laminate, worked great, I think this product is 2.5 mils maybe 3 mils thick so with 2 layers it would be 5 to 6 mils thick, I use my laminator to mount prints all...
  13. Anyone using Sign Lab?

    I use signlab for cutting, printing, ripping works great I like it better than versaworks its easier to use and the profiles that I use work great, //chopper
  14. Roland VP-540 - cut force setting question

    with the roland that I use, what I have done is after setting the print back into the machine for cutting process (after lamination) I do a test cut on a spot of the material that will be discarded to make sure that the setting is correct which tends to be about 120 grams of force, and as the...
  15. What kind of digital camera do you have?

    I use a cannon digital rebel I think it is a 10 mega pixal works fantastic for going directly from shoot to print.. //chopper
  16. Add chisel/prismatic effect to ANY font?

    by hand is the only way it looks right in my opinion I have tried the eye candy and the photo shop effects, but I always seem to end up just applying it my self, here is an example of one that I have done, it was printed on reflective and really looked cool, I left off the phone number which...
  17. Oracal profiles for VP540?

    what rip are you using?? if it is versa works you should be able to down load them from the roland web site, or from which ever rip you are using should have down loadable profiles on their web sites...//chopper
  18. First Time purchase/set up

    kinda sad when churches have to advertise to get your xmas dollar along with wall mart and cheat you out of your profit along the way...hey wasn't wall mart in the sign biz too?? go there to get you cheap banners!! //chopper
  19. Lamination Issues!

    do you have the laminate webbed correctly? the laminators that I have used do not go directly from the roll of laminate to the application rollers, they have a smoothing roller or rod on them before the application rollers, I dont know if your's has this or not but this is how mine is webbed...
  20. Anyone using Bordeaux inks in your Rolands?

    the link is www.inkjetsolution.com
Top