Search results

We recently acquired a fairly new Hp Latex 335. after replacing the heads and giving it a clean/tuneup we build a few profiles for it. We measure to GRACoL and compared to our 370 it wasn't calibrating as high. I have since pulled the heads and checked them, run multiple head cleans. Attempted...

We are using an ink configuration CMYKVV and using spot replacement in the pdf file. let me know if this helps or need

Frank, can you elaborate where i might find that setting to use the embedded file profile and ill test it out on our end. With our shop setting all our outputs to GRACoL (see post above as to why) my next question to you is this. If your using Onyx, what do you select in "Color Management"? we...

We are a small commercial print shop doing signs, banners, stickers and much more. We have been running the GRACoL gamut since i have been here because what ive been told is some of our large format printers don't have as large a gamut so we limit all our printers to GRACoL in order to better...

Question, for all you large format Digital printers. (Specifically ones using ONYX with HP Latex and UV printers) What color gamut/Profile do you print to? and why? Just curious, We have ours set to print to GRACoL 2006 Coated.

Have you taken this course?

Having only been in the print industry about a year and a half I'm still learning almost daily. What id like is to get some info and suggestions on digital print Color management. Preferably focused on UV, Latex and Onyx RIP. I have tried to get my manager to send me to the Onyx classes they...

This may be a rookie question but what exactly do you mean by doing a inearization? Are you referring to the printing a new ICC swatch step and re scanning?

We have 2 HP latex 370's and we use ONYX for our RIP. we have a total of 5 media profiles for them that we monitor the color on. We print and measure to GRACoL. My question is how often do you rebuild your profiles? We rebuilt them all last October and by the first part of November we...

Every morning after our FB550 has been setting all night, the first print of the morning about 6-8 inches in the magenta drops out. After a jet health check and 2-3 standard air purges it usually comes back. We have checked the Thermisters for buildup or defects and all looks good. Any other...

What specific manual are you referring to because we are looking in our pdf manuals not seeing anything regarding that. can you upload the one your looking at?

Looks like firmware 2.4 and version 6.3 Have you printed white>color>clear layers independently Not "simultaneity" with this update? that the only layer options I'm getting in rasterlink when i set u the file

we have a new UCJV300-130 with CMYK ,clear,clear, white white ink setup. what im trying to figure out is how to print a white base, then a color image and then a gloss clear on top. is 2 diferant specialty inks possible on the same print file? when i set it up in rasterlink6 it tries to only...

not fully we were able to get it to print yes but struggling still with the setups for CMYK AND Clear and White profiles. have not had time to work on it the last week or so but hope to this next week. Have you called ONYX support? we have been working with them a bit. Maybe if they get more...

When printing a file with a cut path in Onyx RIP we specify Summa or I-cut for our cutting department. once we specify what one then it has to be cut on that machine. My question is there a way to print the file and have Onyx setup and export BOTH cut files so that when the print gets over to...

We recently purchased a Mimaki UCJV300-130 and can run it with no problem using their Rasterlink software over our network. We have since installed the Mimaki on our Onyx Trive RIP (that we use for all our other printers) When we RIP a job and send it to the Mimaki it gets to 100% in Onyx like...

Starting to lean on the side of the belt. there are some rough patches on the back of the belt and seemed kinda loose. Tightened the belt, seems like its improved but we are looking at the pulleys on the ends now. hard to tell but look like they might have a little wobble to them and can see the...

I wouldnt say alot. we keep the rails well cleaned and oiled. But at this point we are scratching our heads.

We have been noticing a vertical banding on our printing lately on our HP FB500. Specifically on large darker colored sections. (see attached photos) We have tried re-leveling the printer (at the advice of an HP tech) we have tried checking the belt fans and cleaning the belt thinking its not...