Search results

Have Zeth put the link of Facebook. His page is a local hot spot LOL

What exactly is wrong with it? Most techs can probably diagnose your problem without sending you a service manual. PM with any questions

Mosh, I sell the equipment, but we do print here for our customers, and I'm yet to have an issue with the print cut laminate. I'm not saying there aren't problems you can run into, I am just saying I haven't. PM me if you need some assistance with this. I do sell the equipment, but I make it...

It totally depends on the media. I had a customer who was complaining that the cutline was off when he was running long runs of graphics. Each graphic was 12" x 18". He had an XC-540. We did every calibration in the book and everything was fine. Just for kicks, I had him to a short run of 3...

Take the blade out of the blade holder and drop a little WD40 in there..VERY LITTLE..let it dry over night..then take an air can and blow it out..pop the blade back in and you're all set

Room Temperature..Main Power On..you'll be fine. I'd do a manual cleaning before and after you leave and return and you have nothing to worry about

If you already have the printer, I would really try to work with Versaworks and the Roland Color Library. You might find that you're spending money you don't need to spend. I sell to many corporate based accounts that really need to match colors dead on. We're talking commerical & retail type...

Contact your installing dealer and find out what they may have set it to. When we go out to set up a printer, we usually set it so it runs every 18 hours or so it doesn't interfere with anything they are working on

They were running slow earlier in the day but it should be ok now

Remove ALL the previous installed programs and download the driver directly from Roland's site. Had all my customers do this and when it's done fresh from the start it will work without fail

I couldn't agree with Mosh anymore. It's all in the profiles. I have customer's that use Flexi, Onyx, calibrate their monitors with Eye Ones and they are NEVER satisfied. I have a huge account that simply follows the right steps in choosing profiles with designs created in Adobe and there's...

You have to be careful when setting out to buy a printer that's been used. I know when we sell a printer that's been taken in on trade, we gut the sucker out and put in all new parts, and warranty it for a year. Without a warranty or service contract, print heads are VERY costly to replace...

See above..a 210G would NOT be durable enough of a laminate in the case of motorcross graphics. Convex is the way to go

The Epson 11880 is one of those machines that people may have some success with short term vinyl decals if laminated but banners are a total gamble when considering outdoor use. You can't laminate a banner and it's a total crap shoot. For the $9000 he is looking to invest in an Epson, I would...

I agree with Digitial Wood shop. That would be a much more reliable option. Unfortunately, the final statement of his post was right out of my mind as well...attaching the sign would be a concern.

I have a lot of good customers who outsource their work to Merritt. Can't go wrong.

Are these machines out of warranty? Normally, dealers don't go providing Service Manuals to people that are still under warranty. Mainly because there are a lot of things in there that you shouldn't be doing yourself. For the customer in York, PA, PM me if you need assistance as we can...

If it is a new roll, you may want to try letting NO slack out at all and have it pull directly from the roll. Keep an eye on it the first few feet then once you get it on the Take Up Reel you should have no issues keeping it smooth and flat. If you have any questions, please contact me directly...

If I am not mistaken, I believe it is called "CutContour" for Graphtec and CutPath from Roland. Have you gone onto to Roland's site and donwloaded the latest drivers directly from them. I've sent many people in this direction with Windows 7 and it has solved the problem.

Just make sure you are running the lastest version. I believe it's 3.31 they are up to now. Here are the details... Changes in this version 1. Texture feature has been added to LEC-300/330. A new swatch library for Illustrator named Roland Grapac Bri-o-coat Library.ai is installed in Program...