Search results

Do you use a gauge block ?

WOW ! Thank you !

Sounds reasonable. Do you have the bend measurements ? Thank you

Does anyone have a guage block ? If so, what thickness is it ? Thanks

Hello, I have a Ledco 30" Laminator that is missing the front feed table. It is required to operate the laminator by engaging a couple switches. I can probably make one with some specs. Please send pictures of profile etc. If you have parts please send info. New ones are about $100 each...

So I checked the voltage while doing a test print. 21.9 v I have a service manual . It say for 1316 ohm - 1329.0 ohms it should be 22.1 exactly as you stated. Will this be significant to the output? I know just enough to get by and learn some. Gerber sent me another board. Same results. I...

Hello, We have a GRAPHTEC FC 8000-130 Head problem (coil?) Everything works fine otherwise. The head won't go up and down. Graphtec advises the entire head assembly needs to be replaced. If anyone has some ideas on how to fix it or has parts,please contact me . Thanks, MArk

Hello, I was advised to check the print head cable in the FX. . Even checked the continuity on every wire. Gerber sent me another cpu board. Same results. Where is the 2 axis board in the FX ? The Ohm rating on the head is 1317. Thank you

Gerber Edge FX Print Issues After receiving a new keypad ,the FX now starts up. But test printing shows pixels out aver 1.5" or so. See pics. I was told to re-seat the head cable. I even checked the continuity of each wire in the ribbon cable. It may not be the cable ? Anyone have this kind of...

Hello, Did you ever get help with your Accubend ? I have one that is dead in the water. Thanks

There are a few users in Letterville. Email addresses posted too. The Letterville BullBoard: Anagraph Design Art Pro 3.5 Also anagraph ana express elite cutter user manual plotter vinyl cutter info@GravoMaster.com Hope those might help you.

Did you find a solution ? When you have the file open in Composer you can select it and copy and paste right into Artpath. Then just do your tool path. You can also use a dxf file. (GSP) AutoCad Drawing Interchange File Format

Are you trying to execute the internal X08 test ?

The Sabre 408 has limit switches. You just have to jog the head over to the left and back towards home. It will detect the home switch positions and automatically orient itself. Maybe it's still looking for the limit switch ? You can move the X axis by removing the cover on the right side. See...

Hello, Not sure if you are still looking Enroute programming. I'd be interested to know either way. Thanks, MArk

Hello , Do you still have the Omega 1.56 for sale ? Not sure how this forum messages works here. Let me know. Thanks

GERBER ODYSSEY Blade/pen holder carriage head P81869A solenoid lowering problems We have the 48" GERBER ODYSSEY . The carriage solenoid seems to be lowering the pen prematurely. So it drags on the material. We've shortened the spring to hold it back. It works pretty well once we've...