Search results

Static If the head is in the high position lower it and that will usually remove the extra spray ( long enough to get the job done). You could also have a thread from the banner hanging from one of the heads causing it to deflect. You may also want to pull the chrome panel above the heads (4...

What did the problem end up being?

Power supply Had a summa plotter where the power supply went they wanted $400 for a new one took to an electronic repair place and they fixed it for $30. May want to try that.

Banding Not sure if you have solved your problem but I have the 540. That banding usually happens when the head isn't getting enough ink. Do a test print. You may be missing one whole side of the head, then what you need to do is pull the hoses from the pumps themselves for that head and using...

Online designer Was it not signorama that just advertised that one of their shops got the most online orders of the whole chain "10" In one month. You have to have a web designer that knows code or it will cost you a ton to get the look that they show on their sample sites.

esx-500 Actually they do exist, I had one. A company in canada about 10 years ago after the pro ii came out took an old roland pigmented printer (can't recall which one, maybe cj-500) and converted everything to eco-sol, thus calling it an esx-500.

We have the xc-540 and first see if the ink line going to that side of the head has ink in it, it could be just an air bubble. If there is no ink in the line disconnect the line from the pump and draw ink through using a syringe. Do a normal clean. If just air problem the head will come back...

Cutter Problem I had the same problem when the head hit the media clamps. Just unscrew the cutter blade assembly and reset it. Probably the arm isn't getting pushed far enough in when the carriage moves to the far left. Another thing you will need to check is that it can sense the length of...

I'm not sure how proprietery the board is but I would take the board to a electronics repair store, one that repairs tv's, stereos. Usually they have someone that can track down the faulty component and replace it, as long as it isn't a Roland chip or something. I have done that with both a...

Icc Profiles I have about 40 profiles that I used with my converted CJ-500 with flexisign pro version 7. Just e-mail me and I can send them to you Chad Tinordi Sign City Signcity@telus.net

Pinch Roller Ronda Just above the pinch rollers on the aluminum bar there are silver rectangles printed on it just move the pinch rollers so they are not within that space and they will be disingaged. Chad

3500 Cp I have a 3500 Cp, does the Flexisign website not have the profiles anymore? If you want to PM me with your e-mail I can look through my profiles and send you what I have. Chad