Search results

Does anyone have a list of profiles for the JV33 with ES3 inks?

I'm currently having an issue with my mimaki. UJF 3042. Inks are 2 months out from expiry (March 2023) but my printer won't let me use it. Currently I have a machine waiting to have 'ink fill up' on my white carts because I tried a few "work arounds".

Yeah, seems everything I use is just off a little.

Can anyone assist me here on this font? I've tried Gotham & Aharoni, but both aren't quite on the money

It's the 3042 FX. When I say "on", I mean it's always operational and in local. I was referring to the option to let it power off and do the usual cleaning cycles like the solvents I have. I guess it always need to be operational?

Can anyone assist me here? If I turn my UJF 3042 off and leave it overnight/next day, when I come back and do a test print, half the nozzles are missing across various channels. If I do a few cleans then it gets it back up. I'm meticulous in cleaning and maintaining the machine, so I know that...

Ther4e's a lot of posts around stating various issues of CM4. In particular any version above 3.7. And it isn't limited to just Corel. Ai have various issues. EG. I run Ai CC2019 on the production computer, connected to my Graphtec. I upgraded to CM4 version 4.3 (?) and it wouldnt read any...

Always let your media dry out before profile cutting or laminating. Does not matter if it's a wall mural or promo stickers. The solvent fumes affect the adhesive and will also make your stock soft until cured.

nope. Think of it as a bowl full of smarties. You can make the bowl bigger but eventually it's going to look empty. Tell the client you can only print the quality they supply. My usual go to is if they found it on google they aren't going to commit to purchasing a hires image

When you mean service, do you mean your general day-to-day maintenance? This link will give you practically all except the techies manual. https://www.manualslib.com/products/Mimaki-Ujf-6042-Mkii-3625834.html

Thanks mate, I'll DM you now

Hi Sol. Any chance you can get me that file? I'm not having any luck

I've just spoken with the mimaki rep here in Australia. Not sure if he's willing to part with the original file or trying to sell me a new board, but he says once the Inkset has been chosen, that's it. I'm in for life. Would you or anyone else have the original file available? If I update the...

I've gone through all this and it did let me do a 'fill up' also discharge, but it only came up with an option to select SS21 and nothing else And it only came up with two ink configurations inclusive of white. Is it the firmware? Have I missed a.parameter that opens up the option for a gamut...

Yeah, probably not. Close to $1k here in Australia for a roll.

Hmmmm.... There's a thought

Is there a specific parameter for the fill up?

Yeah, it still reads SS21. Attached are the images.

Cheers. Yeah, Ive sorted out the config for this. I managed to get a photo of someone else's machine that ran this. Re parameters, I may need your assistance here. I have installed all es3 carts from the jv33 with the continuous chips andI 've changed the parameter (32?? Can't remember off the...