• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Need Help Large bubbles when applying vinyl to board

    I bought a second laminator so I could apply my laminated vinyl prints to substrates. It almost always leaves large bubbles where the vinyl is not applied to the signs. Even if the bubbles aren’t visible, if I take a squeegee I will see a bunch of large pockets of air. It’s so bad that I’ve had...
  3.

    Need Help Wall Graphics Installation (and print) for Recessed Areas

    Best way to deal with the recessed area without the vinyl failing?!!?! I designed some wall graphics for a gym...What's the best way to go about the recessed area. Its deeper and larger than the average grooves. The print will have to be printed in two pieces because it's wider than 60". It...
  4.

    Adhesive for attaching sign face to wood

    Old sign needs to be remade. (About 1 inch thick) *ALL MATERIALS WILL BE NEW* I was told I could just do the faces of the sign and client would make/cut the wooden center that the faces will be attached to. If I make the faces with aluminum or ACP, what is the best way to attach them to the...
  5.

    Acrylic backlit / halo lit sign needed

    Where can I get a sign like the one below? My client wants the following: -24" diameter circle led sign -Material needs to be acrylic -Halo lit without light coming through the front or the lettering/logo -Must be able to plug in and turned on by either a switch or remote (Cord will not be...
  6.

    Need Help Graphtec cutting inaccurate

    cutter is off. This is with only two rows of decals…. Printed from onyx. I’ve tried different pressures with the pinch rollers but they are still off.. blade was clean and it’s not out too far….
Top