Search results

I have a couple of questions for the mimaki experts can a bad encoder strip screw up your prints?, can a bad cap cause the over spray, can a bad damper cause over spray I have a perfect test print, crisp and no cross contamination I'm having some banding and over spray just started about 5...

Since the day I've bought this problem in August of last year I've had issues with this printer Here's my issue/s While printing the head will gradually hit the capping station harder and harder till it goes into either Y current overload or Y motor overload the problem was so bad that the Y...

Ive got a Gerber Edge LE , that says check vinyl, but its loaded properly with vinyl, there must be an issue with the sensors picking up the vinyl, is that known problem or is there another issue I should be looking at

I have a 10 year old cg-fx 160 with an intermittent issue, sometimes the issue will not show itself for a week or even a month and then boom, error reboots in the middle of a cut, it will show up when jogging the machine, it will show up while reading a crop mark, and when the error shows up it...

Ill explain We have been doing business with a car dealership for over 20 years, they've bought alot of products from us thru the years and we always bought our vehicles from them, We are in a small town so I don't have a choice really Ive been lately been notified thru them that they had...

Good Morning I need a bit of help, my machine(JV150-160 SS21) sat idle doing its cleans and all that since Christmas and yesterday I came back from vacation and decided to do a test print to see how everything is doing, I could see that I was missing most of the yellow color3 and most of the...

Currently running a Mimaki JV150-160, ss21 inks, machine runs perfectly. The only reason why we're considering the switch is to eliminate the outgas wait times of solvent and have the ability to finish jobs faster. Ive been to a demo of a HP 560, looks quite different, but good, salesman is...

Hi Ive just bought a S160t from a fellow sign 101 patron, machine looks top notch, installed all the drivers and software and so on, did a firmware upgrade and now it just hangs on the please wait loading screen after it reads the media.the firmware upgrade was done right and followed the...

We recently bought a few brand new backlit signs from sign depot to resell , and Ive noticed he used some type material for his hanging strips, Im fed up of cutting hanging strips it makes a mess and takes more time then making the actually sign. Is there any company that sells hanging strips...

I have a customer thats looking for a illuminated double face sign and pylon, nothing too big something around 4x8 with roughly a ten foot pylon, are there any suppliers that sells these as kits It would be a lot easier then getting it done by the local machine shop, they are so busy

looking for a prismatic type reflective vinyl thats solvent printable 54" wide, Ive seen a competitor use it around here it looks like its printing pretty good. the prismatic pattern seems a bit different then anything else Ive ever seen.Its not 3m I know he doesn't use any 3m products Im...

Ive been in business for over 16 years now and for the last 5 years we've been running at 150% capacity, doing the smallest jobs to the bigger ones, we are a husband and wife shop its taken its toll on us we are burnt out, the wife and I have discussed closing the store front and dealing only...

Im looking for someone who could supply me with 400 vehicle magnetic circles of 6", there would be 8 different colors times 50 of each, nothing special just 8 standard colors, how much and how fast I could get them, Im in Ontario canada

can someone convert a cdr. to eps. for me, my customer sent me what he has. and it won't open with illustrator. let me know I can email it since it won't let me upload it on here

The Story 2 years ago I was approached by a RV dealer to wrap a used but mint Rv for a university promo program, The Rv dealer was leasing this Rv for 2 years to the school, It was finally done by us with 180 cv3 and paid by the Rv dealer but was calculated in the lease and billed out to th...

So its been 2 weeks now we've been running our new jv150 160 SS21 inks here's our review compared to our jv33 thats running beside it -speed pretty much the same or slightly faster -control panel is a major improvement -rasterlink 6 is pretty much like 5, some benefits but not much(installing...

Im seriously thinking about pulling the trigger on one, we are currently running a jv33 which we've been really satisfied with, and pretty much know in and out but we are at a point where we need another printer, a lot of big jobs and we could use the added help and at the same time we would...

Im looking to purchase a second jv33 160 , I have access to a jv33 close by but its running ES3 inks is it possible to switch it to ss21 inks, and if so is it an expensive process. thanks

Ive been doing this for years in smaller runs of say 100 or 50 the process involves printing the 2 sides of the tag and then sticking them adhesive side to adhesive then installing a grommet at the top. usually at sizes of around 4"x6" always had success with it, and makes for a long lasting...

first scenario we do lots of 8'x16' billboards on alupanels, or aluminum we are using a jv33 so we print 4 panels with 1/8 bleed per sheet and install all 4 sheets they rarely line up, sometimes its decent sometimes it way off I know it doesn't need to be perfect cause nobody gets out of...