Search results

I need to print some decals that are numbered from 1-400 is there a way in photoshop to generate a file thta would be the same decal but numbered, I have omega 2.02 too if I have option to do it that way. Mitch

I printed and installed a trailer wrap on a enclosed trailer to match an expensive RV... Well I guess I am really color blind. It was supposed to print a light gold and its supposedly turn out like olive, I dont see it like that, I see it as a tan color. Anyways thats not my question does...

Ok this is my first big run with my new jv33, im printing a 10foot by 30foot full print, my problem is I have my design made at half scale 300dpi when I want to save it as a tiff file it says some tiif viewers might have a problem with this file and when I try to put it in Rasterlink there is no...

If I place a cs4 illustrator file in cs3 illustrator , which I did and works will this affect the end result, in my final print. these are really basic signs.

Ive attached a pic a what my jv33 is doing, its like moving or something then it gets back on track and then prints start off tracking, it will do it once in a while then its fine not sure.

Is it even possible or am I beating a dead bush, tried a few things with no luck.

I notice yesterday my Norton Antivirus is expired , I go to wally world and there's no regular Antivirus theve got 360 in stock so I say what the hell Ill try that. So Install that first thing in the morning on the shop PC and dont work on it for 3 hours Im doing other stuff.. So I go to print 2...

Im Looking for a way to setup my old edge and gsx 15 so It would be a compact setup Im awaiting my new mimaki cgfx 160 this week and my office space is limited. Im thinking on a type of shelf one on top of the other. I dont want to put it in another room cause its a life saver some times...

I want to establish a minimum charge at my shop just curious if others do . Im just fed up with smaller jobs. some I dont mind but some are just plain stupid and dont want to waste time on them. I know we could debate this but say 50$ does that seem fair. Im located in a smaller town so my...

Cant seem to figure it out any tips? Im printing some labels 3"x5" and it comes out all blury

Ive been looking for a plotter for my mimaki jv33 160" and looking to find a used one without any success. priced 2 brand new ones, a graphtec at 4999$plus taxe canadian and the summa at 6200+230 freight and =taxes canadian again. Any thoughts or opinions. my opinion from graphtec is I...

Is there any say newer solvant printers not able to print directly to banner or canvas material. just asking that because my main competitor has a solvant printer and I've never seen a direct to banner print out of him and Im printing lots of them. any thoughts?

I accidently busted the lcd screen on my Ce2000 this spring and ordered a new one in june and finally got it today. It doesnt fit the same perfectly but it fits with the different bravkets supplied.. Anyways I install it and it works BUT... All lines of text are pushed to the right and 90 %...

I currently own a jv33 160 and I am presently shopping for a plotter to cut out my prints and logos. My questions are can I cut directly from rasterlink3 and do you recommend mimaki plotters. thanks

A customer brought me a psd. file with all text, no graphics is there a way to export it to get a cut file out of this or its impossible.

Just curious how long you can push a cartridge, kinda new to this machine It just started to flash on the screen Ink Yellow near end. How long can I push this will it screw up the machine if I push her till shes empty any comments

I have access to a blown versacamm model sp-540v from a local bankruptcy I know I can get it for dirt cheap I know the shop went belly up because he had no insurance and supposedly had a power surge and the printer is blown nobody checked it out but I heard around town it was the main board but...

Im kinda new to this and Ive been looking on youtube and google for laminating procedures and Im surprise to see all the information thats out there. but Im still having a bit of problems with moutning my prints I was kind of wondering what do you guys prefer doing "laminate then mount or the...