• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Can I switch/flip the Black (K) head cables on an XC-540

    I have an XC-540 but the K head only printed 1 side on a nozzle check. I did basic cleanings and manual cleanings but no improvement. I syringe pulled both (K) lines from below the capping station and have good suction and they draw ink. I removed the left or closest (K) damper and noticed...
  3.

    XC-540 printing fuzzy square with a good test print/nozzle check

    Any experience this before? Any thoughts?
  4.

    Roland XC-540 - I believe light cyan head maybe bad

    I have had overspray and already changed the dampers which helped a little but I still have overspray. I am printing slowly to compensate at the moment. No overspray when printing slowly. Head height is down to lowest. (I have never raised it) 6 years running : 8 hours a day X 5 days a week...

  5. Hi from Joey in GA.

    Hello everybody. This is the first forum I have ever joined. I have a Roland XC-540 Soljet Pro III and a problem with it after 4+ years of running 6 hours a day without an issue. I will look through the older posts to see if someone else has already experienced the same issue before I ask for...
Top