Search results

Recently purchase a roll of 30 mm magnet material for car signs fromm JDS, supplier Magun Magnetics. I saw on the description that I might be able to print on it, so I called Magun Magnetics, The tech informed me that I should be able to use my Mutoch VJ 1324 Wideformt printer, but the...

Is it possible to cut using the above cutter to cut car magnets? I belived the thickness is 30 mil. If not what thickness mil could be cut? Thanks.

Trying to reach the Ink Charging Menu with above menu. Everytime I following the instructions of holding down the +, -, AND > keys and press power, I get the "Check Platen Adjustment Menu". Attempted serval times to cancel out put no luck. Is there someway to reset it back to the Self...

Well finally figured it out. I have the bulk system and the level located on the back that holds the ink into the well was not engaged. So I took out the bulk cartridge and there was no yellow ink residue on the injection hole or the line. So reloaded the bulk ink bag into the cartridge...

Continue to trouble shoot printing issues. I swap out my yellow ink bulk cartridge with a regular yellow in cartridge. Did a another cleaning and nozzel check, nozzle check shows everything is printing except the yellow. Any suggestions. Thanks. EZ Ink Promotions

When printing my yellows are not printing yellow and the red is printing magneta. Cleaned and nozzel check a few times but no change. Change settings on SAI softward from SRGBIFC 61966-21 to Adobe 1998, again no change. Any suggestions? Thanks. EZ Ink Promotions

My printer is printing magneta for red and the yellow is very poor. Black and Blue Colors are fine. Cleaned and nozzeled check a few times. Also set the software in color mangement too RGB 1998, it was orginally on sRGB IFC61966-21. Open for suggestions on what to try next. It was working...

Was looking for a cheaper alternative to yard signs for a local political candidate. One of my resources had fold over signs a lot cheaper than the traditional yard sigin Have Mutoh VJ 1324 and wanted to if anyone has ever printed this type of sign and is it worth it. What type of material...

Just received a low ink status of 1% on my black ink on my menu, check the bag and it appears to have a least a quarter bag full. Is there a way to double check to see if this to see if the indicator is correct? Also is there a way to reset the ink bag or the indicator? Thanks. EZ Ink...

Been having a problem with my printer wasting a lot of ink. For instance when not in use I have noticed a drop in the amounts of my inks. I do not turn of my machine off , and just put it in sleep mode. The next day the ink cartridges ( I am transitioning from cartridge to the bulk system)...

When I start printing on my large format printer I notice that my printer shakes from side to side when the printer head goes across the media. Placed on flat surface and still does it. Anyone have any experience on what causes this issue on their printers. Thanks, Glenn Combs

Have a client looking for pole banners, but wants to use UV ink only because it doesn't fade. Know of any wholesale printers that can do this job. Flags will be flown in Northern California, bay area. Have tried Soardist, they use a UV coating.

Went to 2024 Expo and not a,Mutoh representative there. I just purchased a used Bulk Cartridge set. Have not tried them out yet. Wanted to clean some in,in tubing, so wanted to know if there is a procedure. I cut open one of my used Cartridges, and it only had a bag. Looked at YTubes could...

Just purchased four used cartridges for VJ 1324 Mutoch. Before I insert them want to clean them and remove any dry ink. Was thinking of using cleaning solvent and syringe Anyone have this experience and would like to,share it. Thanks. Glenn

Have a gravograph M40 rotary engraver. Just did my first piece of acrylic media and it look good, but I notice small areas around the lettering that were quite as smooth as the other letters, making the engraving not as uniformed as I would like. I am using a 3.0 general purpose cutting piece...

Recently purchased a contour cut driver from SAI for my Mutoh VJ 1324 to do contour cutting on Graphtec 6000-60 for stickers and decals. However, when I sent the print to my Graphtec cutter it appears not to read the registration marks. Any one else have this experience. Thanks. Glenn Combs...

Have a gravograph M 40 DV and want to start engraving for plaques and awards. Have review both Johnson Plastics and JDS companies supplies and products, and was interested in buying a cutter (they list at $435.00) for my shop? Is this a good idea? Thanks. Glenn Combs EZ Ink Promotions...

My mat on my graphogravph is losing is adhesiveness to keep flat pieces of material stable. Anything I can apply to restore adhesiveness? Thanks. Glenn Combs EZ Ink Promotions Brentwood, CA

Want to create canvas wraps with Mutoh VJ 1324, want to know if anyone could suggest good canvas to use to print on, and what type of coating I should use to put over it to bring out colors. Also, a good supplier. Thanks. Glenn Combs EZ Ink Promotions Brentwood, CA 94513

Looking for a vendor in California that sell the 220 grain Silcon Carb used for sandblasting. Also open to other suggestions. I am new to sand carving. Thanks. Glenn Combs E-Z Ink Promotions Brentwood, CA