Search results

I been using 1.5" 3M Scotch #2020 for years, I usually get a 5 pack from either Home Depot or Lowe's

We have a colex router and had trouble with 18 and 24pt, ink was cracking and now we use T00826 1 Pt Wheel and now it doesn't crack anymore

Digitech TrueFire is fast and print high quality, got the option to get with a conveyor and a Colex router, ask them to give you at least a few profiles since we only got one profile for Caldera Rip

Gerber Mask is made for stencils, is a low tack vinyl, comes in white and blue

I remember last year our distributor said price going up on the 365 ink but not for the 800, not sure why

A lot of time failure is for lack of prepping, even if it doesn't looks like some of the glass got a oil on them if is not cleaned the vinyl won't adhere the way is supposed to, also window perf needs to be laminated for outdoor use for a longer lifespan of the print, if you don't want the...

one of the Yellow/Black printheads is bad, sometimes works by doing just a printhead cleaning but if it does drop again just replace it, it is recommended to replace printheads by pair

Looks like there’s a vacuum problem, I ran 2 FB700 for 12 years but never encountered this issue

It looks like the filter is clogged, possible from bad ink or just a bad hose on the new box of ink, how it did happened? can you see any ink dripping when purging? It could be the floater just giving it wrong reading, floater is inside the thermistor is a thin piece of glass and sometimes over...

I got some pictures here

I never ran a 560 only 360 and 800, for the looks on your video looks like a delayed printing some rips software have a setting that delays after every printing pass, check every window setting

I no longer work at that place but I can try to get you some pictures sometime next week; all it is is a 1'' think block to set on the right side under the curing module to rest on, on the left side you'll need a 1" thick rectangle to the size of the air duct and on the same left side a metallic...

Try using max vacuum on your printer some rips let you make adjustments, also keep in mind that some medias react to moisture in the air so whatever is exposed to the environment which is the paper liner on this case will cause waves reacting to the heat, so basically you will always waste about...

At my last job we had a Latex 260 and it was a decent printer the got traded for a 360 which the 360 got better colors and overcoat cartridge, then we got a 365 which is basically the same 360 with minor changes, then we got a 800 series and had trouble with it, it jammed to much and rubbed the...

Looks to me like your Cyan is dropping out, print solid color bars one color at a time and find out the culprit then go from there and figure out the problem.

Always tell your customers it will take longer than it actually takes to do the job, I ran a HP365 and 800 latex printers and sometimes panels do shift colors and just size little but it does help a lot to print and laminate right after, I recommend to print your panels in order 1-2-3-4-5 and...