Search results

manual please Hello, I need a manual bad. I would like the xc and sj if possible. coreyaaron@rocketmail.com...thanks

I NEEEEEEED a Roland 740 service manual if anyone has one please!!! Hey guys, I do all my mechanical alignment, digital ones then the basic ones and my prints still look like ***. Can anyone please help?

Okay, here is what you do. First if you are not in permanent "service mode" then power off your printer. Press func/remote keys and reboot. Under Parameters change the support value to 2. It is the first screen you see after the reboot. It will let you permanently access #test, #adjust and...

Okay, for all who read this i'll let you in on a little secret. Whoever came up with the silly idea of adding values to your current values is wrong. When you print y si, y bi, y re, etc. whatever.....you replace the values. period. If you add then you will be over compensating and it will screw...

Okay, let's start with the basics....is the ink water based or solvent? You said "full red coverage", to me it says there should be little or no black used....correct? From what it looks like it might be a communication or electrical issue. If you do a test print how does it look? Are all the...

Hey man, i'm a Mimaki tech. Besides doing cleanings and nozzle washes is there any ink on the ribbon cables to the right? The cables should have a white foam block that rests between the cables and the side of the print head to avoid liquid hitting the connectors. Also, check the seating of any...

Here is the deal once and for all so all you know. Mechanically speaking, the Mutoh, Epson, and mimaki high-speed heads are all the same structurally. As far as mimaki goes there are different versions, there are newer 33 heads and newer 5 heads. I have my own Mimaki dealership based in Atlanta...

What printer do you have? The jv3, jv33, jv4? The 160 is the width in cm.

Hey bro, If you are looking for any decent amount of production a printer/cutter combo would never be a good choice. I actually have several TPC'S AND CJV'S. I also have around 30 JV33's i work on. The jv33 is the best bang for the buck you can find. As far as rip software goes i would...

Hey man, what would help you is reading all these opinions and try to find a local site that would have on or the other. You should speak directly to the techs that operate the machinery, not someone who just once in a while checks to see if their employee is working. I'm a technician that...

Scene 329,

Here is the secret..shhhh.... boot the printer up, at the home screen press func-maint-st maint-carriage out. This will move the head to the left end of the printer...at this point you can remove the cover at the end of the printer on the front side and manually push the head to "maintenance...

Looks Like Bent Nozzles, Maybe Debris. Maybe Calibration/alignment Issues.

Is the prefill the solvent or water based? Regardless, if in a last resort you are out of your washing fluid you can use the pre-fill, it is just a milder martini. Oh yeah, don't mix water based with solvent anything but i'm sure you know that. Good luck. COREY AARON NEXT WAVE MEDIA SOLUTION

Welcome Venezuela, Congrats on your purchase of a truly exceptional printer. Your usage of cc's for your printing has too many variables to give a number. What rip are you using? Are you printing directly or doing dye-sub? What OEM ink are you using? (ss21, eco, sb51(52))Good luck. COREY...

Check Your Dampers For Clogging, Do A Nozzle Wash Like This Guy Said, Do Repeated Hard Cleanings And Manually Push The Head Carraige To The Empty Bay And Swab Around The Head....careful

I have alot of ss21 cartridges, some are still good, others not. I'm selling all of it @ very discounted prices. Still in factory plastic wrap, i can sell expired ones with disposable chips. Let me know, i am an authorized Mimaki dealer.

Assuming you are using Rasterlink, I have 38 profiles for SS21 6 color setup. You are on the right track looking at a JV33 due to the fact they have the exact same head. My experience with vinyl and banner material tell me your temp setttings in the order you have listed (pre, print, post) is...

LACK OF INK FLOW, IF YOU HAVE CLEAN FLOWING LINES, THE DAMPERS ARE NEW/REPLACED AND THE HEAD STILL DOESN'T PRINT GOOD TEST PRINTS/FILES YOU EITHER HAVE AN INK ISSUE OR A BAD HEAD. Honestly man there are too many variables just to pinpoint it but, those are a couple.

Hey mate, I have a prototype mimaki printer/cutter that isnt on the market yet, it's similar to yours except a bit larger. couple of q's. "Walltex"? fabric, yes, but what is it used for, wallpaper or maybe banners? Is is like a vinyl? 2nd q. what kind of ink are using? eco, hs, ss21? Let...