Search results

All Graphic Supplies is a Roland Dealer

any ideas?

it's the B in RUB that is confusing me

Hey guys, I should know both of these but I can't seem to come up with them right now. Need to know RUB and of the green thanks

We recently took delivery of a PressVu 200/600 - 4 colour version. We are having issues with overheating coro when printing less than 6' wide, I am sure it has to do with the lamps spending more time over the coro when only printing a 4' wide sheet and not giving the coro a chance to cool down...

I have searched around a bit, and short of calling a dealer haven't found the answer. Do you guys know if when the fb500 prints to a rigid sheet it requires a "tail" to finish printing? thanks

I agree with this statement, if i had researched before hand i would have made sure they came pre-loaded with windows 7 so we could continue to use X5.......but after spending waaaaaaaaay too much time setting 4 computers up and making them connect to the rest of the network correctly, I am not...

Hey Guys We recently upgraded our computers and were forced to upgrade to Corel X6 because of Windows 8. We have always cut vinyl directly from Corel Draw to our Roland plotters, however it seems in X6 you have to convert all text to curves to make it able to be plotted. There seems Corel has...

+1

We would be at least double that too

I tried it with 380 & the special lam (the number escapes me) I had no problem getting the vinyl to wrap on the helmet and stick. But I did have a major problem with the print stretching so much on the sides of the helmet that there was no colour left! I tried 4 times and couldn't get it to...

+1

I have never had this happen......but if it was me, I would totally delete the file from the rip and start again. Test print a copy at 5 or 10%. Then restore it to full size and try again. If it does happen again you know you have bigger problems

did you check to see if the heater fuse is blown? If have the service manual for this printer, if you would like me to email it to you PM me.

Someone please help me out here.......I know there was an old thread somebody wrote explaining how to print a job with Alignment marks repeatedly, so it can print un-attended. Example - I have a job that is set up to print 4 pieces 24"x24" prints with Print/Cut Alignment marks.....but i need...

I have found running a small humidifier right beside the printer works really well. We use the copper anti-static tinsel as well but sometimes its just not enough.

i know there is a topic on here somewhere about this problem. I am 99% sure you need to change the ribbon cable that connects the printhead to the mainboard.

Don't get into screen printing. I did it for 15 years and unless you are going to run massive quantities every single week, its just not worth the time or the smell for that matter. We replaced our screen printing equipment with a flatbed and we out source the 200 + piece runs. Since your...

SPEcoMH_MCVP_v720x720N.icc or MCVP : Matte Calendered Vinyl (ESM) on mine you have to go into media explorer to see the actual icc file names

We run this material using the MCVP profile that comes with VersaWorks on "Standard" Works perfectly on both our sp-540 and our rs-640. +1 for checking that you have your black set to k-100....alternatively for vinyls that seem washed out looking we use C-20 M-20 Y-20 K-100. But have never...