I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I can offer a couple of items to check in Corel Draw. After upgrading from X4 to X6 I noticed all of my X4 files when opening in X6 had to change colors (RGB to CMYK). Not a big deal for some things but for my laser it meant redoing all of my cut lines. Also I needed more memory in my computer...
First you need to remove the background around the table by masking or cropping then rotate the beans and powerclip the beans into the top of the table. All done in Corel.
Thank you all for the help. I tried all of the options offered and I cleaned the encoder strip. I blew out the printer of old dust and hairy things. I finally got my decals printed and cut perfectly.
Thanks again.
Thanks for the replies. I did the env. setup and when I did the print cut setup the feed was dead on but the scan was off to the left by .6 of an inch and I tried to adjust but nothing changed. What does the encoder strip and sensor do and can this cause this problem? As far as the pinch rollers...
I have cut many decals in the past on my Roland SP300 with no problem. Today I printed some decals and cut them but the first row cut was .125 off to the left. The next rows cut about .375 off to the left and the following rows cut .678 off to the left. I checked the print cut test and the scan...
I made a cart for our shop for the same reason as you. We keep the most used media standing vertical near the printer on the plastic end pieces that the rolls come with. My cart uses these end caps to hold the roll while you tip the roll over. Now you roll the cart up to the printer and load the...
I have been using Flexi pro 8.6 for years and never had this problem. When I try to import an eps or ai file into flexi, I get "error importing file do you want to continue. yes no. If you click yes or no you go back to the work page and nothing happens. Even happens using files I have imported...
For less than $1000 you can get into dye sublimation. You can do far more than luggage tags. Full unlimited color and 300 dpi. I do luggage tags using this method.
Gary
I agree with Techman about using Aspire. It is realitively easy to learn and use. It is priced reasonably and has great support. But this program is for 3D work. You can download trial versions of all of there software at vectric.com
What program is the person that will cut your files be...
I can reply to the barcode question. To print a barcode all you have to do is type the info you need in the barcode and change the font to whichever barcode system you choose. When you pick your barcode system you need to pick a barcode font that works for you. Most barcodes you see at most any...
In your command settings you will see 2 choices. GP-GL or HP-GL. whichever is selected choose the other and the little numbers and letters should stop and it will cut properly.
Gary
If you go to the flexi website you will find a free upgrade for 7.6 ver 2 and it has support for the graftec fc7000 included. I had the same problem for the same plotter.
Gary
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.