Search results

Superior Adam, you are cutting 3mm ACM at 8 inches a second with the smaller router head? Also what type of life are you getting out of the Zund 154 bit?. Are you pre printing and then cutting with registration?

Thanks Adam, that is a great idea, I am going to jump on withour supply house to get some of this ordered. Was not aware you could get the bearing without the motor

We have a few JFX200 flatbeds and one of them has a very high pitched whiny sound has the head goes back and forth. Is this a full Y motor replacement? Also another printer is saying replace Y motor brushes. I suppose this could be the problem with both? Any sood sources out there for the Y...

Well shoot Adam...that is who we use for our ACM. We are going to a get a few sheets from them hopefully from another lot and see if it helps. I sure do hope so, we would really love to use it more! Adam have you run into bad batches with MAXMETAL?

Actually I am picking up some new sheets tomorrow and hope to test them this week, but just wondered if anyone else has had that issue

Hello everyone, We have recently decided to print on ACM with our flatbed. We use L100 inks and are getting odd smudges or issues every once in awhile. We have torn the laminate off and printed, we have torn the laminate off and wiped with alcohol(even worse) and we have 3 - JFX200 printers...

Jharler, that is interesting. Were you able to solve the issue with an adjustment?

So I have been more testing and it appears the kiss cut is dead on towards the edge pinch rollers of the summa but the ones in the middle get off and then back towards the other edge they get dialed back in some. I have done the OPOS calibration several times

Also I should verify I am not really dealing with curling just after stickers sit for a but the kiss cut begins to reveal a very slight gap.

Hello White Haus, thanks for getting back to us. Yes we are using feeds and I have cut some circles a month or so ago that were perfect and then we got busy and could not devote time to the printer and cutter and now I am back training and practicing and the circle cuts are not aligned to the...

Thank you everyone for your responses, I really appreciate you taking the time to help out this novice roll to roll guy.

Thanks Ikarusa, I will definately reach out to the company that sold us everything but I appreciate your help and input. To me the biggest issue I am dealing with is the kiss cut being off from the graphic even though the lines are in the right place in the cut file in relation to the graphic...

Hello have been in the flatbed world for over a decade and recently purchased an Epson S80600L, S Series Summa and Laminator and Onyx software We are turning our current product line that we do on other substrated into stickers for our customers. I am running into a few questions/issues. 1...

Thanks for the reply SolventInk

Hello we have one of our Mimaki JFX200 macines acting up. We have been getting the system fault error SYSTEM HALT (*) 509 : HDC POSCNT. It is happening in the middle of the print job usually toward the back of the machine and the head assembly stops at or near the the capping station. We are...

We have a 4 x 8 table flatbed printer and I was wondering if any of you have every increased your suction with a larger vacuum pump on your flatbed printer?

Sorry for my lack of knowledge but are all of these printers able to print on banner material? Textile material, like fabric for pillows, canvas for artwork? Also, since I am in the UV flatbed world, are there certain things to contend with for latex or solvent? I believe solvent needs drying...

We are looking for advice on the best entry level roll to roll $15k-$30km under 72 inches most likely. Our early focus would be to make make die cut stickers so we are needing the printer and wanting to go with a summa or graphtec cutter most likely the Graphtec FC9000. We were leaning towards...