Search results

Hello, When the machine starts or restarts, the print head position is checked, the head moves, left - right, up - down ( CHEK HOME POSITION). Is there movement? How long ago did you change the strip tape? What to check first: 1. strip tape (if bad, then replace) and strip tape sensor (clean)

If changing the heads does not help, that is, the test is perfect, then increase the print delay time between passes. It helps us (Latex 375).

Check out the site - colorbase(com). Section - Profile Search.

The cleaning solution has been tried, it dries up over time, especially on cans of white paint. They began to use a silicone solution.

Give complete information. Hardware revision number? The version and name of the program you are using? Firmware version?

Good day, We have been the user of this UJV100-160 printer for almost a year. Firmware 5.2 (the dealer himself sends us the firmware, the firmware from the Mimaki website does not get up), USB connection. Everything is fine, but there are problems: 1. Magenta (stops printing), we are told "ink...

Good day, We have been the user of this UJV100-160 printer for almost a year. Everything is fine, but there are problems: 1. Magenta (stops printing), we are told "ink defect", they clean the channel and replace the ink. They put a filter, it doesn't help. We are waiting for the next stop, it's...

And before calibrating the table, look under the belt with the vacuum cleaner.

Good day, I confirm that the table needs to be calibrated. A table of deviation from zero is formed, which compensates for the height of the tool during operation. We mill all materials on a special substrate 3 mm., anti-slip, in a roll. Small works, glue with narrow double-sided tape on a large...

If you still have this printer working, send a photo of the Refill PCB board, we are interested in the light bulbs on the board in working order. The board is on the door with ink. Thank you in advance.

Hello, What is your Rip and Printer?

Good afternoon, We print on PET 0.5 mm, transparent and white, no problems. PS: there are problems with print quality ((

I work.

Routing Mat for Summa F1612 Hello. I beg to say the name of the original material for Summa F1612 "500-9333 Routing Mat (11,4m x 1,53m x 2 mm)". Neopren (airprene)? Tight paralon? Who knows the name of the material? Thanks.

Problem solved by shielding the whole cable ionizer.

The pressure - start dripping ink from the printhead Please respond owners AGFA Anapurna M2050 printer. I want to know who has what pressure in the print heads? I have: Working pressure - 33 The pressure - start dripping ink from the printhead: Yellow - 30-28 LtMagenta and LtCyan - 26-25...

Wafels What is your firmware?

Wafels You talk about the encoder strip? But if the ionizer is turned off - normal print!!!!

I apologize. Vertical copying pictures. encoder strip - new (recently replaced). Instead ionizer by using antistatic cord. Original. ---- Ionizer ON. AGFARip - 2.048 Firmware - 2.085

Hello, I am looking for people who have this printer. I want to know whether you are using an ionizer? When we turn on the ionizer, the picture is printed, begins to divide in two or troitsya on the horizon. Printing is not possible. AGFA - gives no answer. Who has any idea? PS: grounding does...