Search results

Update After running and printing with overspray its now magically gone... no yellow no red no overspray whats so ever.... Ruling that maybe ink was causing this issue now that i ran trough that old ink it cleared up. here and then i get a couple droplets of black ink im guessing the bottom...

Hey guys STILL HAVING OVERSPRAY PROBLEMS... OILED UP BAR AND GOT RIDE OF OCCASIONAL Y CURRENT ERROR HAVENT HAD ANY FIREWIRE ISSUES SINCE I FIXED SOME ELECTRICAL ISSUES WITH OUR OUTLETS. JUST THIS OVERSPRAY... HAVE ORDERED SOME STATIC ELIMINATING TINSEL TO PUT ON THE MACHINE TO SEE IF IT...

Hey guys anyone can show me how the fine alignment works dont mines is just printing lines no guide or plus or minus just the different color lines. so far im getting some work done since the printer is printing better its yellow overspray now not magenta with adhesive vinyl no banner...

Mike thanks for that link that definitely as a lot of pdfs that will come in handy and that alignment pdf is exactly what i needed.... will adjust the fine settings on my machine and see it that rids of the problem..... and hopefully my board is good and its just the rip acting up or that...

@genericname Thanks for you help..... i did try 360x 360 the overspray only went away or barley visible when fixed dot was set. i will do the fine tuning just that all i had was a plastic 2x magnifying glass and that was of no help... will get a better one tomorrow to finish the fine tuning...

ok i went trough all the printalign2 options and did the alignments.... this is how the machine is printing.... the over-spray seemed to get better.... still their tough ... i didnt do any of the fine alignments because i didnt have a loupe.... all i had was a magnifying glass which didnt...

@MikePro..... never beed any good at the alignment procedure and all of the supplied reading material is garbage.... can really understand.... it seem like it was written by a 12 year old Japanese kid that speaks english... any input on where to start what not to do with the alignments and...

same problem Hey im having the same problem on my jv3 any updates.... Check my profile for my post with pics and info thanks

CHanged head so i changed the head and its still over-spraying but now that i changed the head its now more clearly visable that its not only over-spraying magenta its also yellow and cyan... Ink Or Static..... This is driving me crazy....

Wow this is a nightmare....... so now im getting firewire board errors might have to send it to macmedia....... but i changed a head to a previously good but clogged head i had in a ultrasonic cleaner.... and running cleaning and soaks now to see if i can get it back to 100percent.... right...

Update Ok guys i ran the machine at 720x720 bi-directional fixed dot not variable dot and it printed slow... to much ink being put on the vinyl but no over spray..... same thing when i tired the print adjust 2 when i was adjusting the variable dot the lines were not straight the dots where...

Has anyone had over-spray issues because of static..... ?

im printing at 720x720 uni directional.... for some reason if i do bi-directional it goes all wacky..... let me try 720x1440

I need Serious Helpp So i managed to finish messing up the head cables on the black head so now i have new cables on black and magenta...... here are some images to show the current prints.... Test Draw is now almost 99% a couple of nozzles shooting a little off but they look mostly all...

Update Same Issue Ok Guys so i took the encoder sensor out and with lint free cloth wiped it down was very dirty, took all the gunk and ink off of it..... Tadaaaaa :help Same Issue, same over spray problem.... i have a 2 pairs of head cables im about to changes those now to see if i...

Hi, I just got a JV3-250SP, I saw the machine working 100% before i purchased with none of these issues present, Took a little while almost 2 months for me to pick it up and install it at my shop. Once i installed the machine, the nozzles were fully clogged. Did multiple cleans soaks...