Search results

HI, ok ill try that. thanks!

The ink only expires in SEPT 25 and I have been using the same ink I have never changed to a different brand. Its Bordeaux solvent ink

Ok, im going to take it out and put in a bowl and suck from the top. Has anyone used acetone? is it too abrasive? or can I give it it a go. I spoke to the company where I purchased the head (in Germany, so its I cant just drive over and have them take a look..) and they seem to think the...

Hi, ok how do I do that though? the cleaner must come from the bottom right? not sure how to do that

If its only to print thats fine, but most of the artwork clients send to me needs cutting as well, and then I need to work through Corel to add cut lines. even finecut doenst want cava artworks, and corel has a rasterslink plugin.

Hey guys, I got a new print head about a month ago. I replaced dampers, wiper and capping station with the new head. since yesterday my magenta nozzles have started misfiring. I go a new head exactly because of this, I completely lost my magenta (the old head was 6 years old, so it was time for...

Thanks so much, we had a power failure on Friday (regular occurrence here in SA) so my printer was off and completely removed from all power source for 48 hours, switched it on this morning, and the side lines gone. So its printing 100% now. Should the lines return Ill take it apart and wipe the...

Hi, ok that might actually be it. when I installed the new print head, it wouldn't work at first (with new calble) so I put the old cable back in and then it worked. So there is a chance that the old cable might have ink somewhere because changing the head was messy. I didnt bohter to be...

Hey Guys, I replaced my print head (MIMAKI CJV30-100) the printing is super good quality now, only problem is it prints a fine line to the left and right on the edge of the media (see photos) these lines ar NOT teh check pattern, I did go and look and it is disabled. I even put on 'ON' and then...

Hi, my PC crashed yesterday and I had to reinstall EVERYTHING. fine cut wouldn't work, and I came looking here for help, I used your FC9 number, and it accepted it as a product key.. so I dont think its locked to your hard drive. Hopefully that helps someone else

I Replaced the dampers when I replaced the head 6 years ago, so havent done that in a long time, I did unplug them each one by one yesterday, and pushed lightly on the side, they all flow good with no leaks, the piples going to the dampers are also full of ink no air bubbles visible, I have...

? as in finished? what does gubbed mean

ok increased the temp to 50 50 50 and print has already improved a lot, still waiting for the new cap... everything is slower in South Africa.. My black is printing solid, yellow cyan and magenta is banding still

Hi, ok so how will I know if its the pump? I put cleaning fluid on the capping station and I did a pump tube wash, it sucks the fluid very quickly, the tubes are clear, no bubbles or ink build up, I do a pump tube was often. how do I test the pump?

ok, super thanks, waiting for the courier to deliver new cap, then ill give everything a good clean and play around with the heat

Please advise? ive got it on 35* 35* 50* (back, middle and front) as per the manual for vinyl

The wiper is also new, 3 months, when it wipes, the ink that it wipes off sits on the wiper edge to edge, so its not only wiping in the middle, I saw that on a different thread as well so I checked that first.

Ok, I was told when I purchased the machine to never let the head dry out, so I always leave it in solution overnight, and then do a nozzle wash before i start printing. is this not correct?

Ps, I have had a look with a flashligth and when the cap lifts up to the head when I leave it overnigth to sit in solution it is perfectly aligned, not skew or anything, it lifts up and 'grabs' the head exactly.