• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Strange white dots on Black print only. HELP!!

    Contamination in the ink / bulk cart system Issue resolved! It turns out one of the other cartridges was contaminated. When I thought I was printing just a black bar, I actually wasn't due to the ICC etc. Turned off the ICC and printed a 1 bit black bar and no dots. It turns out one if...
  3.

    Strange white dots on Black print only. HELP!!

    Hi, I have been pulling my hair out over this. Ok, so I have 2x soljet pro3 xc540 machines. One machine runs bulk inks, the other runs carts. Both machines started doing this around the same time. But I figured out the spots are only coming from the black head! These white dots of varying...
  4.

    Strange lines appearing in middle of prints! Xc-540

    Hi again all, I have a strange one for you. XC-540. After a good run of say 20m, i started noticing strange lines appearing in the middle of the prints. It is not to the left or the right, just in the middle. I adjusted the head height to low and they dissapear. When I put the head height to...
  5.

    XC-540 MAGENTA Half Firing and woes..

    Hi all, just a follow up. I decided to give replacing the transitors a go myself. I tested and both the burnt one and the one beside it was blown. 2 Transistors later, i realised the burn had damaged one of the trace lines on the board. Sent it off to a company in England for repair. It came...
  6.

    XC-540 MAGENTA Half Firing and woes..

    Hi folks, I had an engineer replace the cyan head as it was banding. In the process he showed me the cable connecting to the head one of the end pins was bent. He said it wont be an issue though and continued the process. The head was in and firing perfect for about 10metres. Then Group A...
Top