Search results

Have you tried another brand of ink? Or any solution to this issue?

Yes, all have been empty. Seems that since the redesign of the cartridges this started happening. Not sure if trying another brand of ink would remedy the issue.

It happens on various cartridges not just one color.

Recently I have been having an issue where the ink cartridges run out the printer will continue to print and not give a warning anymore that the cartridge is empty. It used to start beeping when getting low and then stop if completely empty. OEM 220 ink cartridges from Fellers. Is there...

So...after some time and research and going thru the on board menu for Hours... Powered down printer - unplugged from wall - powered on to dis-charge any residual energy - Cut wires from Waste Ink Sensor - plugged power back in to wall - turned printer on - got 'No waste tank' error - twisted...

I have tried moving the switch, but nothing changes. I think there is a way to go into the menu on the machine itself and reset it, but I cant find it.

Bumping this old post because I am having the same issue with my printer. I looked for the ‘Tank Change’ in the user menu but can't seem to find it. Any help getting to this menu would be greatly appreciated.

first question to customer...do you want the flexibility to changes this out? if so how often? stay on the Trailer, the extra sq ft below is not worth having to go mesh or additional framing, windslits, etc. Or contract local welder, if you can not do in house, to weld framing brackets(steel...

Yep, rotated mine on my Graphtec also. :thumb:

Sanmar

:thumb:

Vhb

see my avatar. He likes to pose for pictures.

I have been running Kapco Solvent Printable Vinyl and Banner material for Years. I have yet(knock on wood) to have any of the printable material have a seam. But as Gino, have had maybe 2-3 Cut Vinyl rolls have a seam.

Not sure about yours, but I gently removed the Cutting Strip on my Graphtec, then rotated it and put it back down. My cutter does not cut directly in the center of the strip, so the other side was like new.

6'x25' Banner. Awesome Job!!! Highly recommend!

Looking for Loyalty Cards for a restaurant customer, the kind that have the strip on the back. Anyone done these? Thanks in advance!

Take a flashlight and look at the heads to make sure no "fuzzies" are hanging from the heads. these can be picked up from frayed banner material ends. also check your lines to make sure there are no cracks allowing air to get into the lines. The lines can become brittle where they fit into the...

Fellers has the stand. Check the Merchant section for a supplier for the printed banner. Pole pocket top and bottom.

Did yourself a favor. Let the other guy deal with him. And yeah, I have priced em' at 150% for the PIA factor.