• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Question Graphtec ce6000 sensor Height setting

    Hey there I did a factory reset on my machine and managed to clear my problem, But I can't find the setting to adjust the height of the sensor when its detecting registration marks. Before the reset it was about 1/8 of inch gap from the material and found the marks without much difficulty. Now...
  2. CE6000-60 Registration marks

    Thanks so much for your reply , All great info I'm adding to my arsenal :)
  3. CE6000-60 Registration marks

    oh yes , I've been all over. But any info such as which style you prefer and tips etc would be great. As I say trying to gather as much info as possible to make the print and cut a faster process, I have a support ticket in with Graphtec as of this aft as well. Frustrated o_O
  4. CE6000-60 Registration marks

    Thanks for that I'll keep it on hand, Ive tried both types unfortunately , with minimal results :( . Id really like to get though the sensor test but it just hunts for it over and over
  5. CE6000-60 Registration marks

    Hey there, using Adobe illustrator, yes very rarly it will do a 2nd or 3rd mark before not reading them. I even managed for it to read all 4 and cut a decal successfully but the time it takes messing around profit wise doesn't make sense. Havent been able to get it to read the Arm printed sheet...
  6. CE6000-60 Registration marks

    Hi everyone, Im having Issues with my machine finding registration marks (CE6000-60). I have been trying to tackle it myself by doing my due diligence before posting. I've done the Firmware update on the machine. I also downloaded the ARMS test sheets to conduct with the Pen tool.All software...
  7. Material separating from backing while printing

    Cjv30 130 . Just curious if anyone had run into this problem . See picture . I searched the forum and Google but couldn't find anything. My heater settings are 44 44 50 . Fingers appear at the side of the matetial usually before the pinch rollers and continue to stretch across as the machine...
  8. One printhead doesnt print - roland sc500

    See attached , Located bottom middle of board
  9. Need Help Mimaki software

    thanks guys , its all pretty confusing , I finally got the full version and still working my way though figuring out about print and cut jobs , registration marks etc. not many youtube videos of this exact software. I needed fine cut 8 for illustrator and downloaded a trial, I dont see where...
  10. Question Cjv30-130 Print test

    Hi Guys I picked up a Cjv30 130 last week and have done a medium clean and a hard clean and a nozzel wash, still getting this result. is this minor and can I do anything else to fix it ? thanks
  11. Need Help Mimaki software

    ok thanks I will give it a shot, I was under the impression it still exported to Rastalink to print and cut
  12. Need Help Mimaki software

    Hi guys just purchased a low use CJV30-130 from a reseller. He said he should have a copy of Rastalink in a about a week or so coming in. He also said he would give me it cheap since I purchased the machine. I have the machine moved in and set up at my shop now . I was just wondering if there...
  13. Sc500 crazy test prints

    just curious if anyone had seen this Before Thanks
  14. Roland Sc500 new printheads not printing

    finally found someone who found out it was indeed the circuits on the board , to look at the board it looked mint, I bought a used tested board and the machine is finally spraying ink , not in any kind of pattern it should but at least its a start. just wanted to end this thread as I see so many...
  15. Roland Sc500 new printheads not printing

    It worked when I brought it home , and I had it working for a couple days before it quit. The print head cable worked loose as I had to stand the machine up and it had quite a long drive from the person I bought it from. When I removed the burned print head, the ribbon cable on the damaged head...
  16. Roland Sc500 new printheads not printing

    ok any way to check the pathway ? I checked all fuses I can find marked FL1-FL6 as in the picture. All fuses are ok
  17. Roland Sc500 new printheads not printing

    I sent it out to a supposed "pro" but he kinda screwed me around so I do not have much confidence in his diagnoses , Is checking all the fuses for continuity pretty much the only way to check the fuses ?
  18. Roland Sc500 new printheads not printing

    Yes I just tried that now as per your question and I can pull Ink through both heads
  19. Roland Sc500 new printheads not printing

    Yes I have personally checked them , sent the board out to be checked at mac media by Kent , and had a local electronics guy check over both of the boards including all resisters and fuses , I just replaced both cables on the print head carriage and checked the connections between the main board...
  20. Roland Sc500 new printheads not printing

    After picking up a sc500 recently for a deal , (yes I know they are very old and have read most peoples opinions of the machine, but it is what it is, I run a small business from home). The previous owner replaced almost every consumable component except for the print heads, after setting up the...
Top