• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. coolpixphotography

    Hello

    Hello
  3.

    Help with Chromaluxe Metal and Moisture in the press!

    Hello, we are also a ChromaLuxe certified Plus lab in Europe. I ever experienced such issue. We always remove the moisture when we start sublimating (we heat the res, then press without plates multiples times, until there is no more moisture/condensation below the felt of the bottom plate (just...
  4.

    EPSON V7000 UV ink adhesion problem on Plexiglas/PMMA/PERSPEX

    Hello, No standard Acrylic. Printable acrylic is indeed a much better option but not easily available. It's also very expensive. I believe using a primer would be the way to go.
  5.

    EPSON V7000 UV ink adhesion problem on Plexiglas/PMMA/PERSPEX

    We tried different approach: -Print and then routing with acrylic bits (down and upcut) -Cut, the print, then diamond polish with a small diamond polishing machine (EF200 ) Both add stress on the ink layer and there is some cracks. Now trying to cut to size, and apply tape on the edge to...
  6.

    EPSON V7000 UV ink adhesion problem on Plexiglas/PMMA/PERSPEX

    Hello, We have acquired a year ago an EPSON V700, mainly for having a more affordable price point that our standard plexi-face-mount process (gluing a fineart pigment print on 3mm acrylic front+3mm back) The EPSON is quite okay, but we have observed that the ink adhesion is quite not optimal on...

  7. Swapping Sublimation ink to encapsulated pigments inks - Risky ?

    Hello, I'm not really into the sign business but more into large format fineart. I would like to buy a larger than 64in printer (It could be a Sublimation printer with Epson or Panasonic Heads) and convert it with aqueous pigments inks (Like Canon/EPSON inks used for fineart printers.) The...

  8. Acrylic

    Clean the backside with isopropyl alcohol,. With a good dual side mounting adhesive such as the Neschen range (GUDY 802, 831,...) or similar aqueous/ acrylic based glue, it should work fine.
  9.

    EPSON V7000 10 layers printing how to ?

    Hello, I have recetly acquired an EPSON V7000 UV Flatbed. I'm using the EPSON Edge "rip". I do have caldera but did not purchased the driver (as it adds significantly to the cost of the yearly maintenance) I would like to print 3 layers for a job (behind acrylic: -1st layer CMYK -2d layer White...
Top