Search results

Air assist is a must for engraving - try to turn it to the low end and slowly increase to find the best results.

With vacuum hold down you would never use .125 or 1/4” - you have to surface Mdf for a vacuum table, they have a coating on each side that will eliminate the ability for air to pass through. You have to prevent dust from getting into your vacuum system, this can easily kill an expensive vacuum...

Use 3/4” - once you surface 1/2” you’ll see buckling because it’s thin. Try to find LDF as well, MDF has more glue and Moisture. Vacuum pumps we’ll have a harder time pull through it. Most cabinet materials suppliers will have it. LDF also tends to warp less, we tried several products over the...

I would keep out sourcing, to get clean cuts in plastic & metal your looking at $50k + for a starter Cnc Router package. A good router system will include its own software for operation. The big thing with cnc routers is the tolerances, you want to be able to load your machine & let the machine...

As Bruce stated if your planning on only cutting with no router they can be in the same area. Yard signs & cardboard are clean to cut with no debris. If you’re cutting wood, ACM, acrylic you’ll want your cutter/router in its own room or zoned off area. They are messy to cut and you want your...

Sold

Thanks Mark, Dropping the price to $35,000 - Hot Deal for a one Year old Printer (Half Off) Feel free to Reach out Directly (440)610-9246

More Images

Canon Colorado 1650 UV Large Format Commercial Printer - Light Usage, Low Hours. For Sale is a lightly used Canon Colorado 1650 Printer, This printer is awesome with extremely low ink cost, fast speeds, 8 print heads. Its truly a work horse for any size business. Able to print a full 150' roll...

Multicam have some good affordable matts , we normally get them delivered in a few days of ordering.

Are your pressure pumps going bad ?? If your inks not being pulled equally it might cause issues. These are a replacement item in the user manual from fluid (Dropbox they give has a video for replacement). What material are you printing on ?? We had a static issue with Coro and it caused a...

Just ordered the Roman pro, Amazon has it for overnight delivery - from the reviews looks like it should work. Sihl also reach out with a paper they have in the same line with an adhesive backing. Thanks for the help, I never thought about using a wallpaper glue.

Hmm, just ordered some, will give it a try. Thanks

Customer wants the Paper Feel, I definitely tried to sell them on Vinyl so much easier to work with. Mounting tape wouldn't be a bad idea, gonna do a few samples tomorrow & See how they look.

Hey Guys We are trying to attach 8mil poster paper (Sihl 3686) to wood backing boards for inside use. Any idea on what glue type or technique to use ?? One of our employees recommended mod podge & The results we not great. Im open to ideas, plywood is Sanded Smooth & Painted White for a good...

Not a opinion this one is fact - If your ink is expired by that long its not gonna cure properly & the ink wont spray correctly. Ink first & Than trouble shot other issues. Handtop sells the correct lamps for your machine, just contact them - they can also provide the correct ink & cleaner for...

Do the ink first, The LED lamps last a long time - Shouldn't have to replace these unless machine was damaged or ran like crazy for a few years. Do you have the manual provided with the machine ?? It can be downloaded off the web, it has all this info in it & trouble shooting steps.

Your ink is expired by 2 years yikes - Huge problem right there. When using expired ink you'll get all kinds of issues. You need to flush your lines out & install new ink. There are two filters types on that machine correct ?? Change all filters as well, these are recommended at 6 months...

Temperatures are right, If you lower them than your nozzles wont fire correctly. Temperatures for this machine couldn't change & 39 - 40 is common. Why mess with your voltage ?? Never heard of adjusting this when having print issues. If your getting blurry prints you can check your head...

You’re using unlaminated thin vinyl it’s gonna stretch, with some force you’ll easily get 1/4” movement. I think that series is 3 mil thick so it’s easy to stretch in a warm room. I would recommend just laminating it for all jobs - it will protect the ink better. If you’re using UV ink, we...