I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Started first week of August (2yr old print head) after hot/humid days where the Cyan (1st photo) color had missing areas, could not get it to release. Bought a new print head to try to print the second week and changed dampers - in which could not get the black to work at all (2nd picture)...
Mutoh 1614 Head Assembly Vibration while printing - E074 CR Current Error
Noise/Vibration Issue (shuttering?) on left side as head assembly is traveling home when it throws the error.
Already did the following: Cleaned/greased rail, replaced encoder strip and reader, replaced steel belt...
Replaced all the small parts suggested all the way up to the carriage - still having the same issue on left side as the carriage is returning home... What else could I check?
Replaced all the small parts suggested all the way up to the carriage - still having the same issue on left side as the carriage is returning home... What else could I check?
https://drive.google.com/file/d/1YdzpDPgemT-bks3lP4cxnYDoj6cGbcSe/view?usp=sharing
I have attached a video of the noise/vibration we are still experiencing since Jan 2022. So far no error codes have been thrown yet. We have cleaned, greased, replaced steel belt (it broke), encoder strip &...
https://drive.google.com/file/d/1YdzpDPgemT-bks3lP4cxnYDoj6cGbcSe/view?usp=sharing
Update:
I have attached a video of the noise/vibration we are still experiencing. So far no error codes have been thrown yet. It started several months ago. We have cleaned, greased, replaced encoder strip &...
https://drive.google.com/file/d/1YdzpDPgemT-bks3lP4cxnYDoj6cGbcSe/view?usp=sharing
Update: Check out Video above
I have attached a video of the noise/vibration we are still experiencing. So far no error codes have been thrown yet. It started several months ago. We have cleaned, greased...
https://drive.google.com/file/d/1YdzpDPgemT-bks3lP4cxnYDoj6cGbcSe/view?usp=sharing
Update:
I have attached a video of the noise/vibration we are still experiencing. So far no error codes have been thrown yet. It started several months ago. We have cleaned, greased, replaced encoder strip &...
I did and it ran good for a few. Just started the vibration (only on left side as the head unit heads towards home) noise again within the last week, it is quiet then makes noise an sometimes it is louder than other times then back to quiet, no code yet but it is getting bad/worse by the minute...
Just wanted to say thank you for this. Finally went took back apart everything. Motor did exactly what you described with the spinning and clicking !!! So I had to see the inside also lol. Already bought new motor from solventinkjet where all my other parts come from. Should be here next week...
I got the belt finally and replaced today. Went through everything again and started printing. The noise/vibration is still there but not as bad. It however on the first print run - threw the error again and the head assembly stopped on the left side as it was heading home (which has been the...
Question: While printing, all of a sudden there is a loud vibration noise when the head unit is in motion. I went through and cleaned the rails & regreased, cleaned encoder strip, and metal rollers at the ends that the metal belt runs on. I have adjusted the belt and main supports for the...
I started having issue 2 days ago with the carriage almost finishes print and stops on left side then throws the code. I have cleaned the T-Fence/encoder strip. I tried to run another print - same thing. Double checked everything over tried running another print which it only printed the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.