Search results

Later i repainted the car and added some graphics that i have drawn myself.

This graphics was also made with the Edge, the drawing was made by a friend of mine.

Made a CB Radio with Lighting in it

Made a 1/64 Replica of this Paris Dakar Mitsubishi.

Made graphics on this 1/50 truck, the beige stripes were made with overprint of several colours to make a solid colour without a dot pattern to match the real stripes. I made the recipe myself. The stripes are also contour cut.

Made over 130 of these 1/50 scale models. The Sprinter Vans were repainted to white, all cars have matching number plates and picture on the back like the real cars. All colours were matched to the original van with the Spectratone colourmatching system.

Painted this 1/14 Scania body and made a graphics with slightly different shades to compliment the body colour.

Made the Gigaspace transparent sticker to fit exactly to the shape, so hardly any lines are visible (This is a scale 1/14 Remote Control Truck that i painted for a client)

The stickers on these items were made with an Edge 2

PROBLEM SOLVED: it was the fuse

I have rechecked the fuses and the first fuse next to the wire connector seems blown, i checked it with the multimeter and it does not make contact, i will order new fuses today, hopefully receive them tomorrow.

I have a Gerber GS15 plus, which all of a sudden won't turn on. I have checked the fuses. The machine has 3 glass fuses, i checked them all and they seem ok. Is there a procedure to check the power supply to see if this one is broken? All ideas are welcome of how to diagnose the machine. The...

I made a video of what happens, when it occurs there is also a sound like the motor jams. It happens at the last circle that it cuts before it goes back to the first one. I tried the slow setting also but then nothing happened and all were cut fine. This is at speed 100 %. I have cut the circles...

James Burke i have slowed down these settings too just to check, but did not change the result. I have been running the same settings for 21 years. I have never used this machine on a usb adapter. I once did with my large cutter and that one also had to slow down the settings, or else it would...

i have contacted a company that is specialized in these motors to see if they can be refurbished or that they can supply me with new motors.

jfiscus thank you for your reply, i took the covers off again, i checked all the belts and gear teath, these are ok. Is there a way to check the stepper motor or is it only possible to swap it out for a new one? I have no clue of how to check its function. Is a cracked gear on the inside of the...

I have changed the Buffer chip, but the error still occurs. I will change the other chips that i have got too. When after that it still occurs i will proceed to renew the powercaps.

Jburns: Yes rails is clean, i once had the rails a bit dirty after not using the machine for a while, but then it makes more like an egg shape when you cut a circle then a complete sudden 90 degree turn while cutting, that is not what is causing this problem @Funkotron: it suddenly changes...

I will have to check that....

Hi kritze66, thank you for your reply. My machine has the swivel knife option, that orange belt is not used when using this. My belt is detoriated, and i have locked the head in place, have not needed the normal function in years. I only use the swivel knife because it is way faster than the...