• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Need Help swapping white print head for a color print head - advice from more experienced appreciated

    UPDATE: after thinking it through, I am now considering that to actually change the RIP software settings rather then previously mentioned options. As the printer thinks that it sends 42pl, but it is sending only 14pl, it is expected to have low quality outcome. So anyone can suggest on how...

  3. Need Help swapping white print head for a color print head - advice from more experienced appreciated

    We run a Agfa Aapurna MW, with KM512 14pl print heads for color, and KM512 42pl for white. Printer has recirculation and mixing system for white ink. When we bought the printer a couple of months ago, the white heads were badly clogged and no chance to recover them. Now we have 2 spare KM512...

  4. Wanted Looking for used KM512 ln 42pl

    If you have one that is not needed, interested to buy it. thank you Marius
  5. N

    Not the speed, but trying to get more life out of the print heads. So if one of the 4 fails, I...

    Not the speed, but trying to get more life out of the print heads. So if one of the 4 fails, I swap it. I print at 4 instead of 8 and quality is very good for what I need. But again, color is less relevant, so no need most probably for Lc and Lm.
    • nicubila
    • Profile post comment
  6. N

    BTW, do you know how to print using only the cmyk colors, excluding Lc and Lm? Color match is...

    BTW, do you know how to print using only the cmyk colors, excluding Lc and Lm? Color match is totally irrelevant. Thank you
    • nicubila
    • Profile post comment
  7.

    Printer not moving faster in non-printable areas

    How? Still looking for a solution
  8.

    Printer not moving faster in non-printable areas

    :) It does not bother me that the printer is red instead of blue; but most of my work (90%+) with this printer is about making logos, qr codes etc on flat products. In a day we have to run the same file between 50 and 150 times. And then it starts to be a biggy
  9.

    Printer not moving faster in non-printable areas

    thanks growler, i went that path as in the manual, but no Printer optipns button available, and no skip white spaces option either in any of the other screens
  10. N

    Yes, i can use Onyx. Btw, another quick question: do you know why the printer will move with...

    Yes, i can use Onyx. Btw, another quick question: do you know why the printer will move with print speed in the non-printable areas? More concrete: attached is a file which we use to print 12 products at a time, 2 rows. Once it prints the first row, instead of moving faster to the next printable...
    • nicubila
    • Profile post comment
  11.

    Printer not moving faster in non-printable areas

    I have a agfa anpurna mw - a hybrid flatbed and roll to roll printer, and already printing with it - after switching from a Chinese printer). We use it to print mostly logos and other small signs on (flat) products we make - we align a few products and print same file on hundred products at a...
  12. N

    Yes, and eventually after many handovers from one service person n to another I managed to get...

    Yes, and eventually after many handovers from one service person n to another I managed to get hold of the Agfarip 2000, which now works. Still I am very surprised how difficult it is to find this software which should be widely available if it is used by so many agfa printers (and cannot work...
    • nicubila
    • Profile post comment

  13. Wasatch RIP Agfa Anapurna MW - Can't get software to recognize

    Frankly I tried to look up for the driver myself once I realizes that none of the rip software cannot work. Nothing, so I start writing to agfa, called random people who had or have identical printer, wrote to Asanti, but so far I still don't know what I am exactly looking for. A rip...

  14. Wasatch RIP Agfa Anapurna MW - Can't get software to recognize

    Anyone has the anapurna mw driver? I tried tonfind it anywhere but without much success, and I cannot use any of the rip solutions, even though they are on trial with the latest versions and specifically support anapurna mw. But it is missing, as far as I understand, that "little" driver which...

  15. Need Help Onyx Thrive Very Slow to Print

    I am afraid there is no such agfa forum, or at least what I could find. Very little support in that sense. Firewall is disabled, no Internet connection, no A/V (mcaffee has the anecdote of behaving itself like a virus) ports are cleared in windows. Anapurna mw port is 5000 not 9100 (I don't...

  16. Caldera or Onyx RIP?

    Funny to read old threads filled with so much frustration and any lack of common sense or self reflection. Hopefully 10 years down the road made cmykpro a bit more sensitive :)

  17. Need Help Onyx Thrive Very Slow to Print

    Onyx says: error, the file cannot be printed directly. Use instead print to file. Communication wise, we had the problem of getting the port right. IP was set OK (in the same class as the Windows PC), but the Onyx suggested port 9100 was jot working. I found on this forum the suggestion for...

  18. Need Help Setting up Anapurna M on Onyx

    Hi nrb We are trying to set the anapurna (mw in our case) with onyx (21 here). We have the same issue with the port, but in onyx from the drop down meny we cannot select the 5000 port. Where do you set the 5000 parameter? Also, do you use any other software alongside onyx to have anapurna...

  19. Need Help Agfa Anapurna m2500i onyx profiles please :)

    Hi Stickerjay, did you manage to find any onyx profile? We are having an older anapurna (mw) and try setting it up with onyx, but doesn't seem to be as hoped for. Thank you

  20. Need Help Onyx Thrive Very Slow to Print

    BTW, we are trying to setup the anapurna mw with onyx (21) but we cannot get them work together. Do you need any extra software (I heard some use asanti which I cannot find anylonger) or works just put together?

  21. AGFA Anapurna troublshooting

    12 years later :) Was it the motor+encoder or other issue? We are running into the same issue
Top