• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

contamination

  1.

    VS300i Magenta and Cyan Ink Contamination

    We bought our Roland VS300i about 10 years ago brand new. This printer has always been plugged in so it does its own automatic cycles. We started to have issues about 6 months ago with what we thought was random magenta drop out. If you ran a clean cycle at the start of the day it always worked...
    • shane94
    • Thread
    • contamination vs300i
    • Replies: 8
    • Forum: Roland

  2. Bad Contamination Roland Xc-540 Light Cyan Light Magenta Need Help...

    I have a serious problem as of today with my light cyan and light magenta. Started by noticing the prints were getting really fuzzy, did a test print all looks fine. I remembered how to put it in service mode so I did a fill print and the results are in the photo. Dropbox - 20170207_191859.jpg...

  3. A 'how to' video on recovering from cross contamination in damper.

    "Having done a print test before getting started, I noticed the Magenta had bled into the yellow side. Once I opened the printer and examined the damper, I could see it was 1/2 mixed (contaminated). It was a situation I would have to attempt myself as the tech guy is a 10 hr. round trip. So I...
    • 96XP
    • Thread
    • Replies: 3
    • Forum: Videos

  4. JV5 sublimation yellow cross contaminated with black

    We recently had our JV5-320S serviced for the contamination. We were told that because of our ink switch, that the old ink has damaged the head from 1 year ago. Yet all our JV33-160 are fine, they just needed new dampers. The sad part of this story is that the JV5 is by far the newest printer...
Top