• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

1/2" Foam Board Base

A

Andrew Hodgson

New Member
Hello, I am looking for either a cardboard base or a metal base to hold up large 1/2" Foam Board graphics. We have been using SpiderFeet Stand-Up Bases but the signs can fall over if there is a gust of wind. See attached images for the cardboard and metal base. Where can I purchase these? Or do you have any other suggestions on what to use?
 

Attachments

  • Screen Shot 2019-05-09 at 3.33.56 PM.png
    Screen Shot 2019-05-09 at 3.33.56 PM.png
    361.4 KB · Views: 418
  • Screen Shot 2019-05-09 at 3.34.02 PM.png
    Screen Shot 2019-05-09 at 3.34.02 PM.png
    460.6 KB · Views: 433
  • Screen Shot 2019-05-09 at 3.46.34 PM.png
    Screen Shot 2019-05-09 at 3.46.34 PM.png
    239.3 KB · Views: 391
NicMarKro

NicMarKro

Maker of Weird Things
The metal one in picture 3 is a Double LL Mount from Testrite. There are quite a few similar designs from other companies as well - search freestanding rigid graphic floor mount and you’ll find a bunch.
 
You must log in or register to reply here.
Top