1440dpi with onyx on JV3-250SP

[M@CK]

Im trying to print at 1440dpi with onyx on 250sp in 4-color set. I only get a maximum of 79" wen in the operation manual I read I should be able to do 2540mm or 100" in 1440 x 1440 dpi.

Any one ever experienced this ?

Thanks for the help

 

[HaroldDesign]

Are you sure in Onyx you have a sheet or roll size large enough for the profile you are using? Configure printer/Media/ Media Type/Page Sizes.

 

[M@CK]

Ya I checked that, I just cant figure this one out.
I read on the Yahoo Mimaki forum that the smaller Mimaki cant print more the a meter at 1440 and that it was clear in the Operation Manual. In the 250's manual its clear 2540mm.

I have a friend thats supposed to drop by this weak with a copy of Flexy to see if we get the same limitation.

Thanks for the help.