Sign Banner Decal
Sign Banner Decal
Aluminum Retractable Banner Stands. We ship within 24 hours M-F, we're located in Salt Lake City, UT. We bought these right before Covid hit and it threw a wrench in our plan, we're just going to wholesale them until they're gone.
Each stand includes a 33" x 79" Banner Stand (you provide print and vinyl) and padded carrying case.
All prices include shipping any commercial street address in the Lower 48 (residential or liftgate required would be additional $ contact us for a quote, no po boxes or apo's). Pay via venmo, paypal or square. Call 801.860.1300 or email signbannerdecal@gmail.com with any questions.
4 Stands $30 each
6 Stands $28.50 each
7 Stands $27 each
10 Stands $25 each
20 Stands $24 each
50 Stands $22 each
100 Stands $16 each
200 Stands $13 each
Quick Banner Installation - attach the banner to the included 3m tape then clamp the top of the banner to the aluminum rail
Simple to Use - Install included support pole, step on one of the stand feet to hold it down then lift the Banner then attach to the pole
Reusable - swap out old graphics with new ones using banner tape
Banner stands can be used by themselves or for a larger impact line up 2, 3, 4 or 5 side x side to create a stunning back wall with a larger message.
Set up your design at 33" or 33.5" wide x 82" tall, we suggest printing a thin black line (at those same dimensions) around the outside edge so you know where to trim. The top .5" and bottom 3" will be covered by the frame so the final display size is 33" wide x 79" tall.
Each stand includes a 33" x 79" Banner Stand (you provide print and vinyl) and padded carrying case.
All prices include shipping any commercial street address in the Lower 48 (residential or liftgate required would be additional $ contact us for a quote, no po boxes or apo's). Pay via venmo, paypal or square. Call 801.860.1300 or email signbannerdecal@gmail.com with any questions.
4 Stands $30 each
6 Stands $28.50 each
7 Stands $27 each
10 Stands $25 each
20 Stands $24 each
50 Stands $22 each
100 Stands $16 each
200 Stands $13 each
Quick Banner Installation - attach the banner to the included 3m tape then clamp the top of the banner to the aluminum rail
Simple to Use - Install included support pole, step on one of the stand feet to hold it down then lift the Banner then attach to the pole
Reusable - swap out old graphics with new ones using banner tape
Banner stands can be used by themselves or for a larger impact line up 2, 3, 4 or 5 side x side to create a stunning back wall with a larger message.
Set up your design at 33" or 33.5" wide x 82" tall, we suggest printing a thin black line (at those same dimensions) around the outside edge so you know where to trim. The top .5" and bottom 3" will be covered by the frame so the final display size is 33" wide x 79" tall.