tsgstl
New Member
3m IJ180CV3 VJ ICC profile HELP!
I have a roll of 3m IJ180CV3 and my colors do not look right
my blue looks more purple
and my red looks more maroonish
This was off of fellers Mutoh ValueJet for 3M IJ180Cv2-10 (NOT v3)
I went to 3m and can only find onyx rip
I ran it with oracal 3951g and the colors were very dark
All other prints on materials are fine (all oracal)
the fellers profile I got prints very thin and fast (graphics 2)
The oracal printed very thick (quality 4)
Didn't like the fellers print at all, ink to thin and that scares me. Can I bump up the ink or will all the heat settings not cure the ink in time for my take-up real?
Should I use the oracal and adjust the color?
I know nothing about profiles, always had great luck with oracal. Never really had to fiddle besides B&W photos. I have looked online and cant find or do not know to trust profiles I find. I don't want to waste 20'+ of this stuff if I don't have to and each test/PMS chart I print is adding up. First job I just need a blue and red. Blue for a gradient to white and red text to match red hi-performance vinyl to apply to rest of the vehicle. But in a couple days I need to print stuff on the entire color wheel.
As always thank you in advance.
http://www.fellers.com/VJ64/3M/Mutoh_ValueJet_for_3M_IJ180Cv2-10.ptf
I have a roll of 3m IJ180CV3 and my colors do not look right
my blue looks more purple
and my red looks more maroonish
This was off of fellers Mutoh ValueJet for 3M IJ180Cv2-10 (NOT v3)
I went to 3m and can only find onyx rip
I ran it with oracal 3951g and the colors were very dark
All other prints on materials are fine (all oracal)
the fellers profile I got prints very thin and fast (graphics 2)
The oracal printed very thick (quality 4)
Didn't like the fellers print at all, ink to thin and that scares me. Can I bump up the ink or will all the heat settings not cure the ink in time for my take-up real?
Should I use the oracal and adjust the color?
I know nothing about profiles, always had great luck with oracal. Never really had to fiddle besides B&W photos. I have looked online and cant find or do not know to trust profiles I find. I don't want to waste 20'+ of this stuff if I don't have to and each test/PMS chart I print is adding up. First job I just need a blue and red. Blue for a gradient to white and red text to match red hi-performance vinyl to apply to rest of the vehicle. But in a couple days I need to print stuff on the entire color wheel.
As always thank you in advance.
http://www.fellers.com/VJ64/3M/Mutoh_ValueJet_for_3M_IJ180Cv2-10.ptf
Last edited: