6" Wide economy coroplast stakes source

[Andy D]

My customer is doing T-Markers for a golf tournament and he has been using 6" x 6" coro signs
6" Wide economy coroplast wire stake that he cuts in half, to have the marker at ground level.
I know I have seen economy stakes like the one below, but I can't seem to find them... any suggestions?

 

[2B]

no image attached

grimco
Bullsteel

 

[bannertime]

Parker Davis is a manufacture, can check and see who distributes for them in your area. Could use something like the SS-4 or SS-3. I'm pretty sure Grimco and Nglantz carry them.

 

[Andy D]

whoops

 

[Andy D]

Parker Davis is a manufacture, can check and see who distributes for them in your area. Could use something like the SS-4 or SS-3. I'm pretty sure Grimco and Nglantz carry them.

Thanks, I will check Nglantz... I already checked Grimco, Tubelite, Reece, Fellers

 

[FireSprint.com]

Might be a bit challenging to get this done in the near future. Many of the domestic manufacturers have been struggling to keep up, and because of that converted their lines to only run 10x30" stands (the most popular size)

If you only need a few, check your local hardware store for masonry reinforcement ladder and cut it down to what you need. Here is an example:
https://www.menards.com/main/buildi...ent-ladder/1831166/p-1444421179060-c-5642.htm

When you're ready to buy regular 10x30 H Stakes, we have them in stock with free shipping here: https://www.firesprint.com/fast-free-10x30-h-frame-for-yard-signs/

 

[ChicagoGraphics]

How many are you needing, just a few or thousands of them?