• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Adding Summa D120 to Flexi 8.1

Conor Knoxx

New Member
so, setting up a new computer....
all is going well, except when I try to add my Summa D120 to the production manager.
The plotter is on the list of course, but no "USB" option - only Com ports, etc.
I'm sure I must have solved this before.... but for the life of me, I can't remember how!
Any help out there?
Thanks,
Conor
 

LittleSnakey

New Member
Just add it to what ever com port, then open the production manager. Right click on the Summa D120, select change port then change to the appropriate port.
so, setting up a new computer....
all is going well, except when I try to add my Summa D120 to the production manager.
The plotter is on the list of course, but no "USB" option - only Com ports, etc.
I'm sure I must have solved this before.... but for the life of me, I can't remember how!
Any help out there?
Thanks,
Conor
 
Top