advise for fill in the coolant and ink for Oce Arizona 350GT

[Steven.Cao]

Hi, thanks for all the help before.

For this used Oce Arizona 350GT, I have replaced a motherboard and removed the brackets that secure the carriage and gantry for transport. the printer has passed the installation process.

It is ready for coolant and ink, The RMO is not installed yet.

Any advice would be helpful. I am totally new to the flatbed.

Thanks!

 

[Select Bulgaria Service]

Why in new theme? It is easy. Just find user manual for Arizona 350/360 and read it.
The document is free and you can download it. It is too big for there. May be you have it with printer.
This is one big white book.
When you fill the coolant start the heating from user interface and plug the bags with ink. The printer will fill the ink alone.
You are only required to be able to read. Otherwise, the next question will be "how to print".