ASI Flexi Production Manager

[PixelGrafix]

I have the HP 315 latex - i use ASI Flexi Production Manager.
I had a slight jam as it started printing. cleared ithe jam and resent. But now, everytime i resend the file, it goes up to the RIP then the PRINT screen. And about 20 seconds later it disappears without beginning to print.

Is there a workaround to this?

I'm thinking internal reset. I have shut down and restarted both computer and printer without being able to print.

I called HP and they said i have a perpetual license and need to upgrade to a subscription for 92/month. Once on it...no going back. So that's not a great option for me.

Thanks for any insight.
Mary

 

[Solventinkjet]

Flexi has a glitch where the port reverts back to its default randomly. Check the port in the printer setup and make sure it's correctly set.

 

[Attila Nagy]

To reset Flexi, use the preference manager and load the default one. Flexi works most of the times perfectly.
After reset, need to add your printers and cutters.

 

[ecilop]

Probably not related but If you have a cut on the print make sure flexi didn't default to send Contour job only.

 

[Timotyen]

I have the HP 315 latex - i use ASI Flexi Production Manager.
I had a slight jam as it started printing. cleared ithe jam and resent. But now, everytime i resend the file, it goes up to the RIP then the PRINT screen. And about 20 seconds later it disappears without beginning to print.

Is there a workaround to this?

I'm thinking internal reset. I have shut down and restarted both computer and printer without being able to print.

I called HP and they said i have a perpetual license and need to upgrade to a subscription for 92/month. Once on it...no going back. So that's not a great option for me.

Thanks for any insight.
Mary

SAi Production Manager/Printer driver is corrupted.

Solution:
Uninstall and reinstall SAi Production Manager.

================================================
Which version of SAi Production Manager is it and on which Windows version is it installed?

 

[guillermo]

I have an HP365 and called ASI for an upgrade, (license from HP) and they asked us to pay about $950 to upgrade, I said, no, I will keep using Onyx.

 

[Joseph44708]

Delete that file and recreate it.